Do you need help? Please contact our support team from 9 to 17 CET via support.pressclub@bmwgroup.com.

PressClub France · Article.

Plus de 200 millions de tonnes : BMW Group se fixe un objectif ambitieux de réduction des émissions de CO2 d'ici 2030.

BMW Group renforce sa démarche de mobilité durable en se donnant des objectifs ambitieux en matière de réduction des gaz à effet de serre : Lors de l'assemblée générale annuelle d'aujourd'hui, BMW Group a annoncé sa volonté d’empêcher l’émission de plus de 200 millions de tonnes de CO2 d'ici 2030. Cela équivaut à plus de 20 fois les émissions annuelles de CO2 d'une ville de plus d'un million d'habitants, telle que Munich.

Environnement
·
Technologie
·
Finance d'entreprise, faits, chiffres
·
Société
·
Entreprise
·
Soutenabilité
·
Systèmes de propulsion alternatifs, mobilité du futur
·
Événements d'entreprise
·
Electrification
 

Press Contact.

Maryse Bataillard
BMW Group

Tel: +33-130-031-941

send an e-mail

  • RE:THINK, RE:DUCE, RE:USE, RE:CYCLE – BMW Group fait de l'économie circulaire le thème central du salon IAA MOBILITY 2021. 
  • « Neue Klasse » : Le "Recyclé d'abord" comme méthode de développement.
  • Cellules de batterie de prochaine génération : L'empreinte carbone des batteries haute tension sera réduite de moitié.
  • Les objectifs de réduction de CO2 pour 2030 validés par l'initiative Science-Based Targets.
  • L'ensemble de la production et des sites deviendront totalement neutre en carbone dès 2021.
  • D’ici 2030, au moins 50 % des ventes mondiales seront des véhicules entièrement électriques.
  • Oliver Zipse : « Nous voulons être un pionnier de l'économie circulaire ».

 

Munich. The BMW Group is underpinning its mission for sustainable mobility with ambitious goals for the reduction of greenhouse gases: At today’s Annual General Meeting, the company announced that it will avoid emission of over 200 million tonnes of CO2 by 2030. This is equivalent to more than 20 times the annual CO2 emissions of a city with over a million inhabitants, like Munich. To achieve this, the BMW Group is reducing its vehicles’ carbon footprint throughout their lifecycle – from raw material extraction, through production and the use phase, to end-of-life recycling. Going forward, using fewer resources will be one of the priorities.

“A climate-friendly car is not created solely by using green power. We must design our vehicles for sustainability from the very first day of development: reducing the amount of material used to manufacture them and, above all, planning for reuse and recycling from the very beginning. In the face of rising raw material prices, this is not just an environmental, but also a business imperative,” said Oliver Zipse, Chairman of the Board of Management of BMW AG, at the Annual General Meeting in Munich on Wednesday. “The technology for this is extremely demanding: That is why we want to lead the way on the circular economy and play a pioneering role. We are already working on quotas for the use of secondary material in our “Neue Klasse” that are both concrete and ambitious to meet our high standards.

 

RE:THINK, RE:DUCE, RE:USE, RE:CYCLE – BMW Group makes circular economy central theme of IAA MOBILITY 2021

The BMW Group will highlight the future potential of the circular economy for environmental and climate protection at the IAA MOBILITY 2021 in September. The company's “RE:THINK, RE:DUCE, RE:USE, RE:CYCLE” approach provides a holistic view of how the use of primary raw materials can be drastically reduced in the cars of the future.

The BMW Group already plans to take sustainability to a radically new level in its “Neue Klasse” models from the middle of the decade by significantly reducing its resource consumption per vehicle. The aim is to substantially increase the percentage of secondary material, such as recycled steel, plastics and aluminium. Faced with a shortage of natural resources and rising raw material prices, the BMW Group sees this step as a crucial lever for sustainable business practices and creating a clear efficiency imperative.

To achieve this, the BMW Group has initiated a paradigm shift in development with its “secondary first” approach, i.e. using secondary material wherever the quality and availability of materials allow.

 

Carbon footprint of high-voltage battery to be reduced by more than half

The high-voltage battery plays a unique role in this: The process of manufacturing the battery and producing battery cells is extremely energy-intensive and therefore an important factor in the carbon footprint of any electric car. With the next generation of battery technology to be introduced in the “Neue Klasse”, the BMW Group aims to reduce the carbon footprint of the high-voltage battery to less than half the baseline value for the current Gen5 technology.

In addition to the shift to green power already implemented by cell manufacturers, the new battery and cell concept, combined with enhanced cell chemistry, will also make a significant contribution. Another factor is the growing percentage of secondary material in the battery cells and high-voltage battery as a whole. The housing in the BMW iX* already contains up to 30 percent secondary aluminium and up to 50 percent secondary nickel, which is a key raw material, is used in the battery cell. At the same time, the BMW Group has limited its use of critical raw materials in the current generation of battery cells and reduced the amount of cobalt in the cathode material to less than ten percent. The electric motor no longer requires the use of rare earths.

 

“Circular design” as basis for circular economy

Recycling needs are already considered in the vehicle design – because extracting materials in a very pure form is a central challenge for current recycling processes. For example, the electrical system must be easy to remove, prior to recycling, to avoid mixing the steel with copper from the vehicle’s wiring harness. Otherwise, the secondary steel no longer meets the automotive industry’s strict safety requirements. The use of mono-materials – for instance, in seats – must be significantly increased to enable the maximum amount possible to be fed back into the material cycle.

Another key aspect is efficient dismantling capability. For secondary materials to be able to compete in the marketplace, the vehicle and individual components must be dismantled quickly and cost-effectively as a preliminary to recycling. The prerequisites for this must be put in place when designing the vehicle – for example, by not securing connections with adhesive, but designing them so they can be detached again at the end of the vehicle life and ensuring different materials are not mixed with one another.

 

CO2 reduction goals validated by Science-Based Targets Initiative – entire production will become completely net carbon neutral from 2021

The BMW Group made sustainability and resource efficiency the focus of its strategic direction in 2020 and, with this realignment, is pursuing a much more ambitious course than the goal of limiting the increase in global temperature to two degrees. Throughout the vehicle lifecycle and all three scopes considered, the BMW Group has set measurable and verifiable goals that have since been validated by the Science-Based Targets Initiative:

 

Topic

CO2 reduction up to 2030 (from 2019)

Equivalent climate goal

Production and locations
Scope 1+2

-80% per vehicle

more ambitious than 1.5°C
goal

Supply chain
Scope 3 upstream

at least -20% per vehicle

1.75°C goal

Use phase
Scope 3 downstream

more than -40% per vehicle/km

within target range of 1.5 -
1.75°C goal

Entire lifecycle
Scope 1-3

at least -33% per vehicle

within target range of
1.5 - 1.75°C goal

 

Each of these goals represents a substantive reduction in emissions – in other words, a real decrease in CO2 emissions per vehicle. A key factor is that BMW Group production and all locations have been sourcing 100-percent green power since the end of 2020. Starting this year, the BMW Group is also offsetting its remaining CO2 emissions (Scope 1+2) through selected offsetting measures, which also cover emissions from company cars and business trips, for example. This means that, from 2021 on, the BMW Group’s entire production, including all its locations worldwide, will be completely net carbon neutral.

For the BMW Group, one thing is certain: Such measures are an important factor in offsetting the net impact of climate-damaging emissions – however, they must not delay substantive measures that can deliver a real reduction in emissions. For this reason, the BMW Group only applies these measures for its remaining carbon emissions that are still unavoidable – for example, from the use of highly efficient co-generation plants.

“As far as the BMW Group is concerned: Avoiding comes before offsetting. In this way, we have already lowered our energy consumption per vehicle produced by more than a third from 2006 levels and were even able to reduce the corresponding CO2 emissions per vehicle produced by over 70 percent,” said Zipse.

The BMW Group is the first automotive manufacturer to set itself concrete targets for reducing CO2 emissions in its supply chain by 2030. In addition to the use of green power for the energy-intensive production of fifth-generation battery cells, further measures have been initiated – for example, solar power will be used in the future for production of aluminium, which is also highly energy-intensive. The BMW Group is also investing in an innovative method for carbon-free steel production, developed by US startup Boston Metal, through its venture capital fund, BMW i Ventures.

 

2030: At least 50 percent of global sales fully electric

A key driver for the decarbonisation of individual mobility and the most important factor in reducing CO2 emissions during the use phase will be the massive ramp-up of electromobility – which the BMW Group has stepped up even more in recent years. The company will offer five fully-electric models by the end of this year: the BMW i3*, the MINI SE* and the BMW iX3*, as well as the two main innovation flagships, the BMW iX* and the BMW i4*. These will be followed in the coming years by fully-electric versions of the high-volume BMW 5 Series and the BMW X1. They will also be joined by the BMW 7 Series, the successor to the MINI Countryman and other models. By 2023, the BMW Group will have at least one fully-electric model on the roads in about 90 percent of its current market segments.

Between now and 2025, the BMW Group will increase its sales of fully-electric models by an average of well over 50 percent per year – more than ten times the number of units sold in 2020. Based on its current market forecast, the company also expects at least 50 percent of its global sales to come from fully-electric vehicles in 2030. The actual figure may vary significantly from market to market and will ultimately depend to a large extent on how much progress is made in expanding charging infrastructure at regional level.

At this point, there will no longer be any segment position in the BMW Group’s entire product portfolio where the company does not offer at least one fully-electric model. Individual segments may, in fact, be served exclusively by fully-electric models. The company will also be capable of handling a much larger percentage of fully-electric vehicles if demand develops accordingly. In total, over the next ten years or so, the BMW Group will release about ten million fully-electric vehicles onto the roads.

 

Definition CE 04 – Electric production vehicle to be unveiled this summer

BMW Motorrad is also expanding its range of electric vehicles on two wheels for urban spaces: At #NEXTGen 2020, the company shared a concrete vision of what a production vehicle that could soon take one-track electromobility in cities to a whole new level, both technically and optically, might look like, with the BMW Motorrad Definition CE 04. The BMW Group will be presenting the corresponding production model this summer.

 

*Consumption/emissions data:

BMW iX: Power consumption in kWh/100 km: 22.5-19.5 WLTP. Data are preliminary and based on forecasts.

BMW i3 (120 Ah): Power consumption in kWh/100 km combined: 13.1 NEDC, 16.3-15.3 WLTP.

BMW i3s (120 Ah): Power consumption in kWh/100 km combined: 14.6-14.0 NEDC, 16.6-16.3 WLTP.

MINI Cooper SE: Power consumption in kWh/100 km combined: 16.9-14.9 NEDC, 17.6-15.2 WLTP.

BMW iX3: Power consumption in kWh/100 km combined: 17.8-17.5 NEDC, 19.0-18.6 WLTP.

BMW i4: This is a pre-production model, no homologation figures are available yet. 

 

If you have any questions, please contact:

 

Corporate Communications

Max-Morten Borgmann, Communications Corporate, Finance, Sales

Telephone: +49 89 382-24118, Max-Morten.Borgmann@bmwgroup.com

 

Eckhard Wannieck, head of Communications Corporate, Finance, Sales

Telephone: +49 89 382-24544, Eckhard.Wannieck@bmwgroup.com 

 

Media website: www.press.bmwgroup.com

Email: presse@bmwgroup.com

 

 

 

The BMW Group

With its four brands BMW, MINI, Rolls-Royce and BMW Motorrad, the BMW Group is the world’s leading premium manufacturer of automobiles and motorcycles and also provides premium financial and mobility services. The BMW Group production network comprises 31 production and assembly facilities in 15 countries; the company has a global sales network in more than 140 countries.

In 2020, the BMW Group sold over 2.3 million passenger vehicles and more than 169,000 motorcycles worldwide. The profit before tax in the financial year 2020 was € 5.222 billion on revenues amounting to € 98.990 billion. As of 31 December 2020, the BMW Group had a workforce of 120,726 employees.

The success of the BMW Group has always been based on long-term thinking and responsible action. The company set the course for the future at an early stage and consistently makes sustainability and efficient resource management central to its strategic direction, from the supply chain through production to the end of the use phase of all products.

 

www.bmwgroup.com

Facebook: http://www.facebook.com/BMWGroup

Twitter: http://twitter.com/BMWGroup

YouTube: http://www.youtube.com/BMWGroupView

Instagram: https://www.instagram.com/bmwgroup

LinkedIn: https://www.linkedin.com/company/bmw-group/

Article Offline Attachments.

Article Media Material.

My.PressClub Login
 

BMW Group Streaming

ANNUAL CONFERENCE 2024.

Munich. Here you can see the on demand webcast of the BMW Group Annual Conference 2024, with the world premiere of the next BMW vision vehicle on the "Road to Neue Klasse".

Open Streaming Page

Add your filter tags.

Communiqué de presse
Dossier de presse
Discours
Fact & Figures
Updates
Top-Topic
Submit filter
Clear all
 
Sun
Mon
Tue
Wed
Thu
Fri
Sat
 
Login