PressClub France · Article.
Energie éolienne et hydroélectrique du cercle arctique : BMW Group prévoit de s'approvisionner en acier produit à partir d'énergie verte et d'hydrogène dans le nord de la Suède.
20.10.2021 Communiqué de presse
+++ Accord avec la start-up suédoise H2 Green Steel : premières livraisons pour la Neue Klasse à partir de 2025 +++ Réduction jusqu'à 95 % des émissions de CO2 par rapport aux méthodes conventionnelles +++ Livraison dans les usines BMW Group en Europe +++ Économie circulaire : Les chutes de tôle des usines du BMW Group seront recyclées et réutilisées +++ Andreas Wendt : "C’est une contribution essentielle à notre objectif de réduction des émissions de CO2, dans notre chaîne d'approvisionnement en acier, d'environ deux millions de tonnes d'ici 2030"+++
Press Contact.
Maryse Bataillard
BMW Group
Tel: +33-130-031-941
send an e-mail
Author.
Maryse Bataillard
BMW Group
Munich. The BMW Group continues to push forward with climate protection and is systematically pursuing its goal of significantly reducing CO2 emissions at their source in the supply chain. From 2025 on, the company plans to source steel produced with up to 95% less CO2 emissions and without requiring fossil resources such as coal. The BMW Group has now reached an agreement to this effect with the Swedish startup H2 Green Steel, which uses hydrogen and only green power from renewable energies for steel production. Owing to its particularly energy-intensive manufacturing process, steel production is considered one of the main sources of global CO2 emissions.
“Our goal is to reduce CO2 emissions in our steel supply chain by about two million tonnes by 2030. Sourcing steel produced using hydrogen and green power can make a vital contribution to this,” says Dr Andreas Wendt, member of the Board of Management of BMW AG responsible for Purchasing and Supplier Network. “Steel is essential for producing cars and will be no less important for future vehicle generations. Innovative technologies that enable virtually carbon-free production of steel have a significant impact on our ability to reduce CO2 emissions in our steel supply chain.”
Closed-loop material cycle
In addition to the
delivery of steel produced using green power, the BMW Group and H2
Green Steel have also agreed to create a closed-loop material cycle.
H2 Green Steel will take back sheet metal remnants, such as those
produced at press plants when doors are punched out, and will process
them in such a way that they can be shipped back to the plants as new
steel rolls, also known as steel coils. In this way, raw materials can
be used multiple times in a circular economy and natural resources
protected. Since it requires less energy to produce, secondary steel
lowers CO2 emissions by an average of 50-80%, compared to
primary material.
The BMW Group is already using between 20% and 100% secondary steel in its vehicles and will continue to increase this percentage in the future. BMW Group press plants in Europe process more than half a million tonnes of steel per year.
Ideal location in northern Sweden
H2 Green Steel is building its steel production site in the province of Norrbotten in northern Sweden, close to the Arctic Circle. The region is best known for its reindeer and spectacular northern lights, but also provides access to high-quality iron ore, plentiful energy from renewable sources such as hydroelectric and wind power, a major seaport and generations of steel production know-how.
Unlike conventional processes that rely on coke for making steel, the company employs hydrogen produced using green power to remove the oxygen from the iron oxide. This so-called direct reduction of iron ore does not produce any CO2 at all, only water – thereby avoiding 95% of the CO2 emissions normally produced. The specially built hydrogen power plant, which uses water and green power from across the region, will be directly integrated into the steel production plant. The company also uses local green power for the remainder of the manufacturing process.
BMW Group to source Northvolt battery cells from the same region from 2024 on
Swedish company Northvolt, which develops and produces battery cells for electric cars, is also exploiting the potential for green power in the north of Sweden. In 2018, the BMW Group entered into a cooperation with Northvolt for development of battery cells and acquired a financial interest in the company.
Last year, the BMW Group signed a long-term battery-cell supply contract with Northvolt. The battery cells will be produced in Europe at the Northvolt gigafactory currently under construction in Skellefteå in northern Sweden from 2024. The company will use only green electricity from local wind and hydroelectric power to produce the battery cells.
Neue Klasse poised to set new standards
From 2025 onwards, the BMW Group will be realigning its product range – which has grown successfully over decades –on the basis of the Neue Klasse. The Neue Klasse will be characterised by three key aspects: a completely redefined IT and software architecture, a new generation of high-performance electric drive trains and batteries and a radically new level of sustainability across the entire vehicle lifecycle. These strands are interwoven within an overall vehicle architecture that has been uncompromisingly optimised for electric drive trains, setting a new benchmark in terms of digitisation and electrification, while at the same time ensuring that the characteristic flair of a typical BMW is transferred to future vehicle generations.
Active commitment to environmental and social standards in the steel supply chain
As part of its involvement with the not-for-profit organisation ResponsibleSteel, the BMW Group actively participated in establishing environmental and social standards throughout the entire steel value chain, starting at the mine. This sustainability standard for production sites in the steel industry was published in 2019 as part of a multi-stakeholder process and now forms the basis for certification. ResponsibleSteel is the steel industry’s first global multi-stakeholder standard and certification initiative.