L'usine BMW Group de Leipzig introduit la mesure par la technologie térahertz de composants en plastique dans la production en série.

Leipzig. As the BMW Group systematically advances the digitalisation of its production processes, Plant Leipzig is introducing a terahertz-based measurement system for plastic exterior components in series production. Capable of determining paint layer thickness non-destructively, the new technology has recently been scaled up to enable automated, precise and reproducible quality inspections directly within the production process.

“Terahertz measurement technology replaces complex manual inspection with a fully automated solution, taking quality assurance to an entirely new level,” says Christoph Theiselmann, Head of Exterior Plastics, Production at Plant Leipzig.

At the heart of the innovation is the terahertz measurement system “Irys”, developed by technology partner das‑Nano specifically for industrial inline inspections. The system enables contactless, non‑destructive measurement of multi‑layer paint systems and delivers real‑time data, representing a significant advance over previous inspection methods.

From manual inspection to inline measurement

Until now, paint layer thickness inspections on plastic exterior components at Plant Leipzig have been carried out manually during production, using scalpels and microscopy, thereby destroying parts in the process. This not only generated unnecessary waste but also meant that deviations from specifications were often only identified at a later stage.

Terahertz technology fundamentally transforms this process: sensors mounted on two robots in the existing end‑of‑line measurement cell are automatically and precisely positioned in relation to the component, where they measure the thickness of the individual paint layers by analysing the time‑of‑flight of reflected terahertz waves. Measurements take only seconds and achieve accuracy down to the micrometre level.

The new technology not only delivers objective and reproducible measurement results, but also enables the early detection of process deviations. By eliminating destructive testing, it reduces waste and material consumption while improving both process efficiency and cost-effectiveness. The resulting digital measurement data enhance transparency within production and provide a robust foundation for data‑driven process control.

“The combination of higher measurement accuracy, direct process integration and full digitalisation delivers tangible benefits across the entire production chain, strengthening quality, economic efficiency and resource conservation in equal measure,” Christoph Theiselmann adds.

Digitalisation of plastic component paint operations

Following the introduction of automated surface inspection in 2024, terahertz measurement technology marks the next step towards a fully digital paint shop for plastic components at Leipzig. The measurement and quality data it generates are available entirely in digital form, creating the basis for advanced data‑supported analysis. In the future, this data will be analysed using AI‑based methods to identify deviations early, evaluate trends and continuously optimise process parameters.

Pioneering role within the BMW Group and the plastics segment

By scaling terahertz measurement technology for industrial use, Exterior Plastics at Leipzig has broken new ground in more than one respect. As well as being the first BMW Group site to integrate the new technology into in-house production, Plant Leipzig sets new standards in the plastics segment more widely, being the first to use terahertz technology to inspect paint layer thickness on plastic components.

Following successful piloting and ramp‑up, the new technology can now be deployed with all component carrier systems, or ‘skids’, and is currently being enabled for all colour variants as well. It also offers significant potential for rollout at other plants, particularly in painted body shops and across the supplier network.

The Exterior Plastics team is part of the Purchasing and Supplier Network division at Leipzig. Its 450 employees specialise in the manufacture of injection-moulded plastic exterior body components – such as bumpers, side sills and spoilers – which it supplies not just to Leipzig, but also to the BMW Group plants in Dingolfing and Regensburg.