Do you need help? Please contact our support team from 9 to 17 CET via support.pressclub@bmwgroup.com.

PressClub Portugal · Article.

Innovation driver for hydrogen technology and tomorrow’s sustainable CO2-free mobility

+++ Bavarian Economic Affairs Minister Hubert Aiwanger and BMW Group Board of Management Member Dr Andreas Wendt impressed by Landshut Lightweight Construction and Technology Centre’s expertise in manufacturing components for hydrogen propulsion +++ Innovative capabilities and industrialisation expertise showcased in small series of BMW i Hydrogen NEXT from 2022

Landshut
·
Tecnologia
·
Fábricas, Instalações
·
Fábricas
·
Sistemas de Motorização Alternativos, Mobilidade do Futuro
·
Produção, Reciclagem
·
Electrification
 

Press Contact.

Joao Trincheiras
BMW Group

Tel: +351-21-487-3080

send an e-mail

Downloads.

  
Attachments(1x, ~157,69 KB)
  
Photos(41x, ~55,12 MB)

+++ Bavarian Economic Affairs Minister Hubert Aiwanger and BMW Group Board of Management Member Dr Andreas Wendt impressed by Landshut Lightweight Construction and Technology Centre’s expertise in manufacturing components for hydrogen propulsion

+++ Innovative capabilities and industrialisation expertise showcased in small series of BMW i Hydrogen NEXT from 2022

Landshut. Development of CO2-free drive technologies is a top priority for the BMW Group. Hydrogen vehicles can also play an important role in the growth of e-mobility and will become an additional option in the long term. Just like electric vehicles, hydrogen vehicles come with an electric drive train. However, they do not obtain the energy they need from high-voltage batteries, but produce it directly on board the vehicle from hydrogen. In this way, the use of innovative hydrogen technology can help further decarbonisation.

The Lightweight Construction and Technology Centre (LuTZ) in Landshut plays a key part in this by producing essential components for the hydrogen-electric drive train that will be installed in the BMW i Hydrogen NEXT from 2022 and supplying them for installation of the fuel cell system in Munich. Bavarian Minister of Economic Affairs Hubert Aiwanger and BMW Group Board of Management Member Dr Andreas Wendt were able to see the company’s strong innovation capabilities and industrialisation expertise in the field of hydrogen for themselves at today’s “Hydrogen Technology Day”.

“I am convinced hydrogen technology will gain traction – and I am committed to making Bavaria a high-tech location for hydrogen technology. This is a constructive way of responding to the climate debate,” stated Hubert Aiwanger, Deputy Minister-President of Bavaria and the state’s Minister for Economic Affairs, Regional Development and Energy, on a visit to the component plant in Landshut in Lower Bavaria. “The focus now is on building a hydrogen infrastructure at national and international level, from production to application.”

“Here at our Lightweight Construction and Technology Centre, we are creating important innovations for the mobility of the future,” said Dr Andreas Wendt, member of the Board of Management of BMW AG responsible for Purchasing and Supplier Network. “We are developing highly complex components tailored to the demands of our cars. In this way, the location is making a vital contribution to the company’s transformation towards e-mobility. More than ever, our in-house component production in Landshut serves as an innovation driver.”

Small series of second-generation BMW i Hydrogen NEXT from late 2022

Hydrogen vehicles generate the electrical energy needed from hydrogen directly in the vehicle and offer a number of advantages. They are best suited for customers who frequently drive long distances, require a great deal of flexibility or do not have regular access to electric charging infrastructure. Refuelling takes just a few minutes, as it does with conventional fuels. Vehicles that run on hydrogen produced using renewable energy can make an important contribution to meeting climate goals.

The BMW Group will pilot a small series of the BMW i Hydrogen NEXT from 2022, based on the current BMW X5 and equipped with a hydrogen fuel cell e-drive that only emits water vapour. The BMW Group is building on its experience with fifth-generation e-drives to develop this vehicle.

However, the conditions needed to be able to offer BMW Group customers a hydrogen vehicle are not yet in place. Further commitment is necessary – particularly with regard to the hydrogen filling infrastructure and requirements throughout the entire energy system, where green hydrogen must be available in sufficient quantities and produced at competitive prices for individual mobility.

In Germany, the European Union and other major regions of the world, lawmakers have recognised the significance of green hydrogen for the energy system of the future. The European Union has mad hydrogen technology a focal point with the “Green Deal”. The BMW Group welcomes these activities. Major Asian markets, such as Japan, Korea and China, have expressed a strong interest in establishing infrastructure for hydrogen vehicles. The conditions for hydrogen fuel cell vehicles will develop differently around the world.

Highly innovative components from Landshut for fuel cell system

Preparations are already underway in Landshut for the fuel cell system that will be used in the BMW i Hydrogen NEXT from 2022. The production location in Lower Bavaria will manufacture highly innovative components for the small series: the so-called stack housing made of light metal, which holds the fuel cells, and the media end plate made of plastic and light metal castings, which creates an air and watertight seal around the stack housing. “Media” refers here to the hydrogen, oxygen and coolant that are channelled into the housing through the media end plate to initiate the chemical reaction in the fuel cells. These complex components are specifically designed to withstand prolonged contact with hydrogen.

"Having the Lightweight Construction and Technology Centre here at the site gives us a real advantage over our competitors. We have innovative capabilities and industrialisation expertise; we are able to develop strategically crucial innovations ourselves and, at the same time, we can reliably assess external partners and suppliers,” said Dr Wolfgang Blümlhuber, head of Technology Driving Dynamics, Light Metal Casting in the Purchasing and Supplier Network. “In a technological transformation, success doesn’t happen by itself. Courage, pioneering spirit and a long-term shift in competence have been part of the secret of our success in the past – and our highly qualified employees and their willingness to change play a key role,” according to Willibald Löw, Chairman of the Works Council of BMW Group Plant Landshut.

Fuel cell system in the BMW i Hydrogen NEXT

Within the drive train, the fuel cell system of the BMW i Hydrogen NEXT is continuously fed with hydrogen from CFRP tanks and generates up to 125 kW of electrical power for the electric motor mounted on the rear axle. The underlying mechanism for this is a chemical reaction between hydrogen and oxygen, with water the only reaction product. Two 700-bar tanks, which together hold six kilograms of hydrogen, guarantee extensive range in all weather conditions and can be refilled in just three to four minutes.

The electric motor in the BMW i Hydrogen NEXT is the same highly-integrated fifth-generation e-drive used for the first time in the BMW iX3. The high-voltage battery that sits above the e-drive serves as a performance buffer and provides additional dynamics for acceleration. The drive train system delivers a total output of 275 kW (374 hp).

Over 40 years of experience with hydrogen technology

The BMW Group has over 40 years of experience with hydrogen technology and more than 20 years in the field of hydrogen fuel cell technology. Both the technology and the BMW i Hydrogen NEXT are being developed in Munich. Hydrogen is also not new to the Landshut location: Back in 2000, Plant Landshut fitted the technology flagship of the day, the BMW Hydrogen 7, with a hydrogen combustion engine and cast components shaped using sand cores. “Plant Landshut represents the power of innovation from Lower Bavaria,” underlined Dr Stefan Kasperowski, head of BMW Group Plant Landshut. “With the current innovations for alternative CO2-free drive technologies, the BMW Group is once again making a clear commitment to the location.” As the BMW Group’s largest component plant worldwide, the Landshut location has six different technologies at its command and concentrates cross-technology pre-development expertise at the Lightweight Construction and Technology Centre.

In addition, the BMW Group is already using hydrogen fuel cell technology wherever it makes sense to do so: The fleet of several hundred fork-lift trucks with fuel cell drive trains currently deployed in logistics at the car plants in Spartanburg and Leipzig will be further expanded in stages.


If you have any questions, please contact:

Communications BMW Group Plant Landshut
Saskia Eßbauer, BMW Group Corporate and Governmental Affairs, Communications Landshut
Telephone: +49 151 6040 3232, Email: Saskia.Essbauer@bmw.de

BMW Group Corporate Communications
Sandra Schillmöller, Corporate Communications, Communications Purchasing and Supplier Network,
Telephone: +49 151 601 12225, Email: Sandra.Schillmöller@bmw.de

BMW Group Innovation Communications
Carolin Seidel, BMW Group Innovation Communications, press spokesperson, Research, New Technologies, Innovation, Telephone: +49 151 601 90340, Email: Carolin.Seidel@bmw.de


Media website: www.press.bmwgroup.com
Email: presse@bmw.de

BMW Group Plant Landshut
At BMW Group Plant Landshut, around 3,600 employees produce light metal cast engine, suspension and body structure components, plastic components for the vehicle exterior, carbon body components, cockpit and equipment options, electric drive systems, special engines and drive shafts. Plant Landshut is the BMW Group’s largest component plant and supplies components to all BMW Group vehicle and engine plants worldwide – and therefore for virtually every BMW, MINI and Rolls-Royce vehicle, as well as for BMW Motorrad. BMW Group Plant Landshut stands for component production characterised by digitalisation and geared towards sustainability, and is committed to responsible use of resources.
With forward-looking technologies, BMW Group Plant Landshut assumes the role of innovation driver in the technological transformation of the automotive sector and its supplier industry. At the Lightweight Construction and Technology Centre (LuTZ) adjacent to the plant, specialists from a wide range of disciplines are brought into development processes for new vehicles in the early stages and help actively drive sustainable development of future vehicle models. BMW Group Plant Landshut is a socially responsible, innovative and attractive employer for the region of Landshut and Lower Bavaria.
www.bmw-werk-landshut.de

BMW Group
With its four brands BMW, MINI, Rolls-Royce and BMW Motorrad, the BMW Group is the world’s leading premium manufacturer of automobiles and motorcycles and also provides premium financial and mobility services. The BMW Group production network comprises 31 production and assembly facilities in 15 countries; the company has a global sales network in more than 140 countries.
In 2020, the BMW Group sold over 2.3 million passenger vehicles and more than 169,000 motorcycles worldwide. The profit before tax in the financial year 2020 was € 5.222 billion on revenues amounting to € 98.990 billion. As of 31 December 2020, the BMW Group had a workforce of 120,726 employees.
The success of the BMW Group has always been based on long-term thinking and responsible action. The company set its course for the future early on and is making sustainability and resource efficiency the focus of the company’s strategic direction – from the supply chain, through production, to the end of the use phase, for all its products. 


www.bmwgroup.com
Facebook: http://www.facebook.com/BMWGroup 
Twitter: http://twitter.com/BMWGroup
YouTube: http://www.youtube.com/BMWGroupView
Instagram: https://www.instagram.com/bmwgroup
LinkedIn: https://www.linkedin.com/company/bmw-group/

Article Offline Attachments.

Article Media Material.

My.PressClub Login
 

BMW Group Streaming

OUR ALL-NEW FULLY ELECTRIC TRIO.

01 June 2021. Here you can see the webcast of the event "Our all-new fully electric trio: BMW iX, BMW i4 and the first fully electric BMW M".

Open Streaming Page

CO2 emission information.

Os valores do consumo de combustível, das emissões de CO2 e de consumo de energia aqui apresentados foram determinados de acordo com o Regulamento (CE) 715/2007 na versão aplicável no momento da homologação. Os valores referem-se à versão base de um veículo na Alemanha e na gama apresentada é considerado o equipamento opcional e os diferentes tamanho de jantes e pneus para a versão selecionada.

Os valores dos veículos já se baseiam no novo Regulamento WLTP e são traduzidos para valores equivalentes aos do NEDC de modo a garantir a comparação entre os veículos. [Relativamente a estes veículos, no que se refere a impostos relacionados com o veículo ou outras taxas baseadas (no mínimo, entre outros) nas emissões de CO2, os valores de CO2 podem ser diferentes dos valores aqui apresentados.]

As especificações da eficiência de CO2 são determinadas de acordo com a Diretiva 1999/94/CE e o regulamento europeu na sua versão atual aplicável. Os valores apresentados são baseados no consumo de combustível, valores de CO2 e de consumo de energia de acordo com o ciclo NEDC para a classificação.

Para mais informações sobre os dados oficiais do consumo de combustível e as emissões específicas de CO2 dos automóveis de passageiros novos, consulte as diretrizes sobre o consumo de combustível, emissões de CO2 e consumo de energia elétrica de automóveis de passageiros novos, disponíveis gratuitamente em todos os Concessionários BMW.

Latest Facts & Figures.

Specifications of the BMW 2 Series Gran Tourer, valid from 03/2021.
08.03.2021
F46 LCI
Dados Técnicos, Especificações
Specifications of the BMW X5, valid from 03/2021.
01.03.2021
G05
Dados Técnicos, Especificações
Specifications of the BMW X7, valid from 03/2021.
01.03.2021
G07
Dados Técnicos, Especificações
Show all

Add your filter tags.

Informação à Imprensa
Dossier de imprensa
Discurso
Fact & Figures
Updates
Top-Topic
Submit filter
Clear all
 
Sun
Mon
Tue
Wed
Thu
Fri
Sat
 
Login