Interview with Willy Rampf (BMW Sauber F1 Team Technical Director) on duration of construction phase and move into the new building (German/English). Crane shot: side view of old main building, pan to glass façade, pan to entry gate to truck hall / connection between old main building and new building, pan to front view of new building / wind tunnel building, bridge between new building and wind tunnel building, details of architecture on new building, bridge, entrance to wind tunnel building, details of architecture on wind tunnel building, wide shot from above, new building from above. Arrival of guests, reporting to reception, welcome in reception area by staff, pan to reception area without people.

Interview with Willy Rampf on Atrium (German/English). Dolly move through atrium, pan to atrium, wide crane shot, racing and testing team at work, rack focuses and close-ups.

Interview with Willy Rampf on design office (German/English). Dolly move through design office, workstation, close-ups of mouse and monitor, pan.

Interview with Willy Rampf on cutting room (German/English). Wide shot and close-ups of cutter, control panel, removal of carbon-fibre sheetings, close-ups of carbon-fibre sheetings.

Interview with Willy Rampf on the use of silicone (German/English). Wide shot, silicone heater, liquid silicone runs into tube mould, cutting, filling into casting mould, removal from casting mould, finished silicone part and final product of carbon-fibre.

Interview with Willy Rampf on clean room (German/English). Carbon-fibre production by layering the carbon-fibre sheetings (front wing), cutting, vacuum pumping.

Interview with Willy Rampf on autoclaving (German/English). Vacuum-pumped carbon-fibre part (front wing) loaded into autoclave for curing; tubes attached, doors closed, ‘recipe’ entered at operating panel.

nterview with Willy Rampf on composite assembly (German/English). Dolly shot, assembly of separate carbon-fibre parts, close-ups.

Interview with Willy Rampf on welding (German/English). Pan of welding work, close-ups.

nterview with Willy Rampf on mechanical fabrication (German/English). Wide shot of CAM office; wide shot of machine room, medium-long shot with automated gripper, close-ups of gripper, manual filing, dolly shot of machines.

EDM with electrode, close-up of control panel and monitor, wide shot of EDM machine.

Interview with Willy Rampf on Rapid Prototyping (German/English). Wide shot of sintering machine for producing prototype parts from nylon powder; close-up of monitor, close-ups of curing resin with laser (stereolithography).

Interview with Willy Rampf on electronics department (German/English). Wide shot of electronics workshop, workstation, close-up of monitor; drilling cable, close-ups, soldering, close-ups, brightly-coloured rolls of cable.

Interview with Willy Rampf on hydraulics department (German/English). Wide shot of hydraulics workshop, steering simulation, pan to monitor, rack focus, close-up of hydraulic pressure regulation, close-ups of mechanical parts during steering movements.

Interview with Willy Rampf on quality control (German/English). Wide shot of workstation with check station, close-up of monitor, close-up of measuring arm, wide shot of ultrasonic workstation, close-up of sweeping and scanning, close-ups of ultrasonic measuring device.

Interview with Willy Rampf on car assembly (German/English). Travelling shot of vehicle from behind, close-up of rear wing, side travelling shot from behind, rack focus to roll bar, closer side pan, out-of-focus rear wing from behind, speed zoom to rear wing, rack focus to steering wheel.

Interview with Willy Rampf on seven-post rig (German/English). Wide shot of seven-post rig from front at side, low frontal, close-up of tyres, rack focus from front to rear wheel, rear wheel from front at side.

Interview with Willy Rampf on maintenance department (German/English). Wide shot of maintenance workshop, close-ups of work on parts of front and rear axle.

Interview with Willy Rampf on bridge (German/English). Wide shot of bridge on 3rd floor, three staff members going through from wind tunnel building to new building (several settings), wide shot of bridge on 2nd floor with an F1 car being transported from the new building to the wind tunnel building.

Interview with Willy Rampf on aerodynamics office (German/English). Dolly shot of aerodynamics office with two CFD workstation compartments, CFD workstation, close-up of monitor, CFD animation with and without sponsors, aerodynamics workstation (model design), close-up of monitor.

Interview with Willy Rampf on model shop (German/English). Wide shot of model shop, close-ups of work on 60% model, front wing from front at side, 60% model from front at side, rack focuses.

Interview with Willy Rampf on work in wind tunnel (German/English). Outer shell of wind tunnel tube, pan, wide shot, staff enter test section, close-ups of work on 60% model, crane shot of control room, wind tunnel test (various settings).

Interview with Willy Rampf on truck hall (German/English). Arrival of BMW Sauber F1 Team truck, parking in truck hall, sliding doors opened, wide shot of truck hall, pan to front of new building with door open, opening sliding door, BMW Sauber F1 Team truck leaves.