PressClub USA · Article.
Twenty Year Anniversary: BMW Manufacturing’s Landfill Gas-to-Energy Project Continues to Power Factory.
20.04.2023 Press Release
Spartanburg, S.C. For decades, the BMW Group has been using innovative technologies in its efforts to improve sustainability. It was 20 years ago that BMW Manufacturing started using recycled methane gas from a local landfill to provide electricity and hot water for the plant. The result of this groundbreaking idea: more than 9,200 tons of CO2 emissions have been reduced each year, which is equivalent to eliminating CO2 emissions from vehicles driving 23.5 million miles every year. Currently, about 20 percent of Plant Spartanburg’s total energy needs (electricity and heat) are provided by landfill gas.
send an e-mail
Spartanburg, S.C. For decades,the BMW Group has been using innovative technologies in its efforts to improve sustainability. It was 20 years ago that BMW Manufacturing started using recycled methane gas from a local landfill to provide electricity and hot water for the plant. The result of this groundbreaking idea: more than 9,200 tons of CO2 emissions have been reduced each year, which is equivalent to eliminating CO2 emissions from vehicles driving 23.5 million miles every year. Currently, about 20 percent of Plant Spartanburg’s total energy needs (electricity and heat) are provided by landfill gas.
Because of the great success of this project, BMW Manufacturing announced today that it will extend its partnership with Ameresco, Inc. for an additional eight years. Ameresco constructed the 9.5-mile pipeline from the Palmetto Landfill to Plant Spartanburg. This means nearly 74,000 tons of CO2 emissions will be reduced over the next eight years.
“For two decades, this project has been a win-win for Upstate South Carolina. It greatly reduces CO2 emissions, resulting in cleaner, healthier air for everyone to breathe,” said Dr. Robert Engelhorn, president and CEO of BMW Manufacturing. “Intelligent resource management and the fight against climate change are expressions of our sense of responsibility. The BMW Group will reduce CO2 emissions per vehicle by 40 percent from 2019 levels by 2030 across the spectrum.”
“The old saying that ‘one person’s trash is another person’s treasure’ is literally true for our landfill gas-to-energy project,” said Manfred Pernitsch, vice president of Real Estate Management and Environmental Protection for the Americas. “This project has greatly reduced greenhouse gas emissions and air pollution for two decades. We have used the energy produced by our turbines to heat the office and production areas as well as heat our water, saving BMW several million dollars each year.”
When the partnership began, Ameresco designed and built the 9.5-mile pipeline from the Palmetto Landfill to Plant Spartanburg as well as the gas processing and compression facilities.
“When we look back to the start of this partnership more than 20 years ago, sustainability was in its infancy. While it was not a common topic in many Corporate America board rooms, it was for our partners at BMW. We are excited to be celebrating the renewal of an innovative project engagement that was far ahead of its time,” said Michael Bakas, Ameresco’s Executive Vice President. “We are also grateful for the many core team members at BMW whose passion for sustainability resulted in a best-in-class project to harness the power of biogas solutions to usher in a cleaner era for the auto industry.”
According to the U.S. Environmental Protection Agency website, landfills are the third-largest human-generated source of methane emissions in the United States. Methane gas is a natural byproduct of the decomposition of organic materials in landfills. It is also a potent greenhouse gas that is a key contributor to global climate change. Reducing methane emissions, the EPA says, is one of the best ways to mitigate climate change.
Instead of “flaring” or burning off the methane gas, the BMW project captures the methane produced at the landfill using dozens of gas extraction wells. The gas is then treated to remove moisture and impurities and is compressed at the landfill’s Recovery and Compression Station. The methane then travels through a 9.5-mile pipeline from the landfill to Plant Spartanburg.
At the plant, the methane gas is cleaned and compressed again; then it’s fed into two efficient gas turbines at the plant’s Energy Center. The turbines generate electricity and heat water throughout the eight million-square-foot Spartanburg plant.
Since 1992, the BMW Group has invested nearly $12.4 billion in its South Carolina operations. BMW Manufacturing is the largest BMW Group plant in the world, producing more than 1,500 vehicles each day. The plant is an important part of BMW’s global production network and plays a critical role in meeting the high demand for BMW Sports Activity Vehicles and Coupes in the U.S. and around the world. Nearly 60 percent of its vehicles are shipped to about 120 global markets, making BMW the largest automotive exporter by value in the United States for nine consecutive years. In 2022, more than 60 percent of BMW vehicles sold in the U.S. came from Plant Spartanburg. The model portfolio includes six top-selling BMW X models, five Motorsport X models, and three plug-in hybrid electric vehicle X models. The factory has an annual production capacity of up to 450,000 vehicles and employs more than 11,000 people.
BMW Manufacturing Co., LLC
BMW Manufacturing Co., LLC is a subsidiary of BMW AG in Munich, Germany, and is the global producer of the BMW X3, X3 M, X5, X5 M and X7 Sports Activity Vehicles; the BMW X4, X4 M, X6 and X6 M Sports Activity Coupes; and the all-new BMW XM. In addition to the South Carolina manufacturing facility, BMW Group North American subsidiaries include sales, marketing, and financial services operations in the United States, Canada and throughout Latin America; a manufacturing plant in San Luis Potosi, Mexico; and a design firm and technology office in California. For more information on BMW Manufacturing, visit www.bmwusfactory.com.
BMW Group in America
BMW of North America, LLC has been present in the United States since 1975. Rolls-Royce Motor Cars NA, LLC began distributing vehicles in 2003. The BMW Group in the United States has grown to include marketing, sales, and financial service organizations for the BMW brand of motor vehicles, including motorcycles, the MINI brand, and Rolls-Royce Motor Cars; Designworks, a strategic design consultancy based in California; a technology office in Silicon Valley and various other operations throughout the country. BMW Manufacturing Co., LLC in South Carolina is the BMW Group global center of competence for BMW X models and manufactures the X3, X4, X5, X6 and X7 Sports Activity Vehicles as well as the new BMW XM. The BMW Group sales organization is represented in the U.S. through networks of 350 BMW passenger car and BMW Sports Activity Vehicle centers, 146 BMW motorcycle retailers, 105 MINI passenger car dealers, and 38 Rolls-Royce Motor Car dealers. BMW (US) Holding Corp., the BMW Group’s sales headquarters for North America, is located in Woodcliff Lake, New Jersey. Journalist note: Information about BMW Group and its products in the USA is available to journalists on-line at www.bmwgroupusanews.com and www.press.bmwna.com.
# # #
Article Offline Attachments.
Twenty Year Anniversary: BMW Manufacturing’s Landfill Gas-to-Energy Project Continues to Power Factory. PDF, EN, 724.44 KB