Bavarsko strokovno znanje iskano po vsem svetu: Kako se BMW Group pripravlja na serijsko proizvodnjo novih visokonapetostnih baterij

^{Dodatne informacije na voljo spodaj in v priponki v angleščini.} 

Munich/Parsdorf. With the Neue Klasse, the BMW Group is ushering in a new era of pure electric driving, starting series production end of 2025. The high-voltage battery is a key component in any electric vehicle. Before large-scale series production can begin, manufacturing processes must be developed and pre-series batteries put through their paces. This takes place at the BMW Group’s pilot plants for high-voltage batteries in Parsdorf and Hallbergmoos and at the Research and Innovation Centre (FIZ) in Munich. “Our pilot plants for high-voltage batteries are strengthening Germany’s capacity for innovation,” says Milan Nedeljković, Member of the Board of Management of BMW AG responsible for Production. “They are laying the groundwork for the new series plants worldwide, ensuring a smooth ramp-up of high-voltage battery production.” To produce high-voltage batteries for the sixth generation of BMW eDrive (Gen6), the company is establishing five assembly sites across three continents: in Irlbach-Straßkirchen (Lower Bavaria), Debrecen (Hungary), Shenyang (China), San Luis Potosí (Mexico) and Woodruff (USA).

Quality is key: Consistent zero-defect approach
For the in-house developed Gen6 high-voltage battery, the BMW Group is implementing intelligent, state-of-the-art production processes using the latest technologies. “For production of our high-voltage batteries, we are pursuing a consistent zero-defect approach,” explains Markus Fallböhmer, head of Battery Production at BMW AG. “Highly intelligent, AI-supported quality checks are integrated into the production process to help us achieve this.” Because quality is key: In bodies for the Neue Klasse, the high-voltage battery serves as a structural component (“pack to open body”). The new cylindrical round cells are integrated directly into the high-voltage battery (“cell to pack”). With its innovative production processes, BMW Group’s pilot and series plants are setting new industry standards for battery production. Examples include, among the consistent zero-defect approach, the use of digital production twins for tasks such as employee training, as well as leveraging expanded AI databases to optimise supply and production logistics. All production steps undergo seamless in-line monitoring with comprehensive data storage, enabling maximum process stability and continuous data-based optimisation.

Pilot plants up close: Parsdorf, Hallbergmoos and Munich (FIZ)
The largest pilot plant for Gen6 high-voltage batteries is located in Parsdorf, where over 350 employees have been building initial prototypes since 2023. Since mid-2024, some of the high-voltage batteries produced there have already been delivered to the vehicle plant in Debrecen, Hungary, where they are installed in test vehicles for the Neue Klasse. A pre-series plant for high-voltage batteries is also located near Munich Airport. Since summer 2024, the site in Hallbergmoos has been developing manufacturing technologies for high-voltage battery assembly. Around 200 employees are working at this small-scale battery factory. The Hallbergmoos site serves as a model for the series production at Plant Woodruff near Spartanburg, South Carolina, US. At the Munich Research and Innovation Centre (FIZ), another 200 employees are manufacturing and testing prototypes and smaller module variants of the high-voltage battery. Several floors of the recently opened Aeroacoustics and E-drive Centre (AEZ) are dedicated to this work.

Series launch of five battery plants in under two years
The systems and processes developed at the Bavarian pilot plants will be rolled out to the series plants worldwide. Within less than two years, series production will ramp up at five locations across three continents. In line with its "local-for-local" principle, the BMW Group has positioned its Gen6 high-voltage battery assembly sites as close as possible to its vehicle plants. This approach safeguards production, even in the event of unforeseen political and economic developments. It will also strengthen existing production sites, while preserving and creating jobs. Series production of the BMW iX3, the first model of the Neue Klasse, will get underway at Plant Debrecen late this year, alongside high-voltage battery manufacturing at the same site. The launch in Debrecen will be followed by the battery assembly plants in Shenyang, Irlbach-Straßkirchen, Woodruff and San Luis Potosí.

How the BMW Group builds Gen6 high-voltage batteries
The BMW Group sources battery cells for its high-voltage batteries from leading cell manufacturers, who produce the cells to the company's specifications. The highest technical standards apply. Upon receipt of goods, additional measurements – such as voltage checks – are carried out. Next comes cell clustering, where the battery cells are connected to coolants. This step ensures optimal insulation and cooling of the cells. The cell clusters and cell contact system are then laser-cleaned and welded with pinpoint precision. The in-line inspection continuously monitors each weld seam in real time. An innovative foaming process follows, ensuring that all elements are protected as a mechanical unit. The foam thus guarantees the safety, stability and durability of the high-voltage battery. The housing is then closed, sealed and riveted. In the final assembly step, the Energy Master – the central control unit – is installed onto the high-voltage battery. A permanently elastic sealing adhesive is applied to ensure a reliable seal. Finally, each high-voltage battery undergoes a 100% end-of-line inspection to ensure quality, safety and function.


If you have any questions, please contact:

Corporate Communications

Christian Marxt
Press spokesperson, Production Network, Powertrain and High-Voltage Batteries
Cell phone: +49-151-601-79158
Email: Christian.Marxt@bmwgroup.com

Sandra Schillmöller
Head of Communications Production Network BMW Group
Cell phone: +49-151-601-12225
Email: Sandra.Schillmoeller@bmwgroup.com

Media website: www.press.bmwgroup.com/deutschland
Email: presse@bmwgroup.com