Do you need help? Please contact our support team from 9 to 17 CET via support.pressclub@bmwgroup.com.

PressClub Global · Article.

HUSQVARNA CR AND SM 50 - THE NEW MINI CROSS AND MOTARD FROM HUSQVARNA

The essence of a real dirt bike and supermotard in miniature. This is the nature of the new Husqvarna CR and SM 50, the “mini” that have everything you need to make your debut as a real rider. Liquid cooled two stroke engines, disc brakes, adjustable suspensions, steel chassis with the same shape as the Husqvarna racing bike, single cylinder engine with dual clutch transmission depending on the driver's expertise and competitiveness.

Motorcycles

Press Contact.

Liane Drews
BMW Group

Tel: +49-89-382-60964

send an e-mail

Author.

Liane Drews
BMW Group

This article in other PressClubs

 

The essence of a real dirt bike and supermotard in miniature.This is the nature of the new Husqvarna CR and SM 50, the “mini”  that have everything you need to make your debut as a real rider.

Liquid cooled two stroke engines, disc brakes, adjustable suspensions, steel chassis with the same shape as the Husqvarna racing bike, single cylinder engine with dual clutch transmission depending on the driver's expertise and competitiveness.

The line is the same as the Husqvarna dirt bike and Supermotard; with the classic white/red colours for the CR version and white for the SM one, just like the bike that Antoine Meo rides in the Enduro world championship and Adrien Chareyre rides in Supermoto.

The framework is in CrMo steel tubes with rectangular, circular and oval section; the most visible section as it connects the upper beam to the hub.The rear frame is detachable.

The fork is also in CrMo steel and supports a dual piston brake caliper in forged and anodized aluminium.The rear brake disc has a diameter of 140 mm while the front one has a diameter of 160 mm with race replica "daisy" design.

Front safety is guaranteed by a system with Formula radial pump in forged and anodized aluminium with adjustable aluminium lever.

The handlebar, with practical Husqvarna personalized pads, has a diameter of 22 mm.

As regards suspension, the Marzocchi fork has 32 mm diameter piston rods and 185 mm stroke.The Sachs shock absorber has a wheel stroke of 200 mm , adjustable spring preload and Hydraulic rebound.

The front wheel is 12” the back one is 10” with aluminium rims, while SM version has a different colour, different sized front wheel (10”) and racing slick tyres.

 

As regards the engine, both versions are fitted with a liquid cooled two stroke 50 cc engine which supplies 11.2 HP at 10,500 rpm. The speed ratio is single gear with adjustable centrifugal dual clutch transmission:one configuration for learner riders and one for experts.

The carburettor is a 19 mm Orto PHBG.The fuel tank has a capacity of 2.7 litres.

Thanks to the stability offered by the steel framework, the over-dimensioned suspensions and the disc brake system, the CR/SM 50 sets new standards in terms of safety and at the same time represents the starting point for tomorrow’s motocross , enduro  and supermoto champions.

 

HUSQVARNA MOTORCYCLES S.R.L.
BMW Group

Martino Bianchi
- Coordinator PR and Racing Activities
Via Nino Bixio, 8 - 21024 Cassinetta di Biandronno - Varese – ITALY
Phone +39.0332.756.405 - Fax +39.0332.756.418 - Mobile +39 335 7466508
Martino.Bianchi@husqvarna-motorcycles.com http://www.husqvarna-motorcycles.com

 

 

 

 

 

 

Article Offline Attachments.

Article Media Material.

My.PressClub Login

PressClub Information

RSS NEWS FEED.

Open Website

With the PressClub RSS service, you can also receive publications as a news feed. Choose from various topic-specific feeds as needed, or use the feed with the latest articles to stay up to date.

CO2 emission information.

Fuel consumption, CO2 emission figures and power consumption and range were measured using the methods required according to Regulation VO (EC) 2007/715 as amended. They refer to vehicles on the German automotive market. For ranges, the NEDC figures take into account differences in the selected wheel and tyre size, while the WLTP figures take into account the effects of any optional equipment.

All figures have already been calculated based on the new WLTP test cycle. NEDC figures listed have been adjusted to the NEDC measurement method where applicable. WLTP values are used as a basis for the assessment of taxes and other vehicle-related duties which are (also) based on CO2 emissions and, where applicable, for the purposes of vehicle-specific subsidies. Further information are available at www.bmw.de/wltp and at www.dat.de/co2/.

Search Settings.

Press Release
Press Kit
Speech
Fact & Figures
Spanish
  • Language of Attachment
  • Arabic
  • Chinese - simplified
  • Chinese - traditional
  • English
  • English - US
  • French
  • German
  • Hungarian
  • Italian
  • Japanese
  • Korean
  • Multilingual
  • Russian
  • Spanish
Updates
Top-Topic
Submit
Reset
 
Sun
Mon
Tue
Wed
Thu
Fri
Sat
 
Login