- BMW i4 to be launched three months ahead of schedule
- BMW Operating System 8 installed for first time in new BMW iX* –
world's largest fleet for over-the-air upgrades by end of 2021
- Breadth over niche: around 90 percent of market segments to have
fully electric models by 2023
- Deliveries of fully electric models to grow by well over 50
percent annually on average by 2025
- ‘Neue Klasse’ to spearhead product range from 2025
- Fully electric models to account for at least 50 percent of global
deliveries by 2030
- MINI to become a fully electric brand by the early 2030s
- Circular economy as goal for future product generations
- Outlook: Significant increase in Group profit before tax
- Zipse: “Transformation will give BMW a competitive edge”
Munich. The BMW Group has entered 2021 with ambitious
targets for growth and profitability and will be putting the first
forerunners of its far-reaching technology offensive on the roads in
the coming months. At the same time, it has set the course for a
comprehensive realignment. From the middle of the decade, a new
generation of models will take premium mobility to a new level from a
technological perspective.
“The BMW Group has ambitious plans for 2021. We have started the new
year with strong momentum and are aiming to return to pre-crisis
levels as swiftly as possible – and go even further,” said
Oliver Zipse, Chairman of the Board of Management
of BMW AG, in Munich on Wednesday. “We have a clear roadmap for making
the transformation of our industry a real competitive advantage for
BMW in the coming years: uncompromisingly electric, digital and circular.”
After a demanding year that ended with a succesful final spurt, the
BMW Group is determined to remain on a course of recovery in 2021 and
has set itself ambitious targets, including significant growth in
Group profit before tax. The Automotive
segment is expected to a record a solid increase in
deliveries. The segment EBIT margin
is forecast to improve to within a range of 6 and 8
percent for the full year 2021.
“2021 is all about growth for us. At the same time, we are prepared
to respond flexibly,” said Nicolas Peter, Member of
the Board of Management of BMW AG, Finance. “We always think and act
long-term; by making the right decisions today we are setting the
stage to achieve our ambitious strategic goals for 2025, 2030 and beyond.”
Electric, digital, circular – a clear roadmap for transformation
The BMW Group is driving the transformation towards fully electric
connected mobility in three phases. The first phase
involved pioneering the e-mobility venture with Project
i, embracing the new technology and ultimately transferring
electric know-how to series production. Over time, this technology has
become integrated across the entire product portfolio, particularly in
the form of plug-in hybrids. Apart from the electric drivetrain
itself, other key factors driving the transformation include
software and the digital interaction with the vehicle.
Back in 2014, the BMW Group created the option to book and pay for
services online, directly from the vehicle via the BMW
Connected Drive store. Moreover, since 2018 BMW drivers
have been able keep their vehicle software up to date via
remote software upgrades, similar to downloading
the latest software for a smartphone.
The second phase of the transformation began with
the option to choose the preferred type of powertrain – from
combustion engines through to fully electric power – in one and the
same model. The prerequisites are smart vehicle
architectures and a highly flexible production network that
enable maximum interchangeability between the various drivetrain forms
when optimally combined.
World's largest fleet featuring over-the-air upgrades on roads
by end of 2021
In terms of digitisation, the BMW Operating System
8, which is scheduled for launch in 2021, is the most
powerful in-vehicle data processing system the BMW Group has ever
developed. The new operating system makes every BMW a digital
powerhouse with the ability to perform over-the-air
upgrades at amazing speed.
This year, the BMW Operating System 8 will be installed for the first
time in the all-electric BMW iX*, forming the basis
for the eighth generation of BMW iDrive – the
simplest and safest operating concept to be installed in a vehicle.
Both technologies will be subsequently rolled out across the various
model series. The number of vehicles that can be updated with
remote software upgrades also continues to grow
rapidly. By the end of 2021, with well over two million units, the BMW
Group will have the world's largest fleet of vehicles
capable of installing new or upgrading existing functions over
the air.
Going forward, the BMW Operating System 8 will also be capable of
providing customers with an even broader range of functions on
demand that can be subsequently ordered and installed over
the air. Moreover, customer offers will be structured more
flexibly, enabling functions to be purchased outright or
rented for three years, 12 months or just one month.
Breadth over niche: fully electric models to cover around 90
percent of current market segments by 2023
The combination of smart vehicle architectures and a highly flexible
production network will enable the BMW Group to have around a
dozen fully electric models on roads worldwide by
2023. This year, the three models already on the
market – the BMW i3*, the MINI SE* and the BMW iX3* – will be joined
by two key innovative models, namely the BMW iX* and the BMW i4, the
latter three months earlier than originally planned. “The launch of
the BMW iX* and the BMW i4 will signalise the start of our technology
offensive in 2021: these two all-electric vehicles will set the
benchmark for BEVs going forward,” said Zipse.
Fully electric versions of the highly popular BMW 5 Series and the
BMW X1 will follow in the years to come, together with other models
such as the BMW 7 Series and the successor to the MINI Countryman.
Based on this strategy, the BMW Group will have at least one
fully electric model on the road in around 90 percent of
its current market segments by 2023. “We are consciously adopting a
broad approach with our all-electric offering rather than staying
niche,” Zipse stated.
The strategy will enable the BMW Group to maintain an optimal
balance of attractive products and efficient capacity
utilisation at its plants, even if demand in certain markets shifts
completely towards fully electric vehicles in the coming years. This
will give the BMW Group a strong competitive edge in
the years ahead.
By the time the second phase of the current transformation reaches
its peak in 2025, deliveries of fully electric models
will have grown by an average of well over 50 percent
annually and therefore more than tenfold compared to
2020. By the end of 2025, the BMW Group will have delivered
around two million fully electric vehicles to
customers worldwide.
Transformation creating opportunities – the BMW Munich plant
is a good example
The BMW Group's plant in Munich, where production of the fully
electric BMW i4 is set to commence in 2021, is a prime example of how
a forward-looking approach to transformation can bolster
competitiveness in the long term. The current
production of combustion engines in Munich will be relocated to the
Steyr (Austria) and Hams Hall (UK) locations in a step-by-step
process, which is scheduled for completion by no later than 2024. By
2026, new vehicle assembly facilities will be built
on the existing engine production site, based on the new cluster
architecture specifically geared towards electric drivetrains. The BMW
Group is investing some € 400 million in these measures.
Employees at the existing facility will be either
deployed in other planning and production areas at the Munich plant or
transferred to other Group locations in Bavaria. Alongside a raft of
other measures, the BMW Group is in the process of expanding its
e-Drive production competence centre in Dingolfing from currently
1,200 to up to 2,000 employees. Moreover, in order to meet future
requirements across all relevant fields from e-mobility
through to data and analytics, the BMW Group is embarking
on the biggest qualification offensive in its
history, with some 75,000 participants undergoing further training in
2021 in Germany alone. This massive undertaking continues the Group's
longstanding tradition of transforming plants and locations when
needed, while at the same time safeguarding jobs for the future.
Neue Klasse poised to set standards in digitisation,
electrification and sustainability
The third phase of transformation will take effect
from 2025 onwards, at which stage the BMW Group’s product
range – which has grown successfully over decades – will be
realigned on the basis of the Neue Klasse. The Neue Klasse will be
characterised by three key aspects: a completely redefined IT
and software architecture, a new generation of
high-performance electric drivetrains and batteries
and a radically new approach to sustainability
across the entire vehicle life cycle. These strands
are interwoven within an overall vehicle architecture that has been
uncompromisingly optimised for electric drivetrains, setting a new
benchmark in terms of digitisation and electrification, while at the
same time ensuring that the characteristic flair of a typical
BMW is transferred to future vehicle generations.
“The BMW Group is never satisfied with what it has achieved so far –
that's what sets it apart from the rest of the field. This spirit will
characterise the Neue Klasse: high tech on four wheels for customers
intent on experiencing in just five years' time how mobility will feel
in 2030,” said Zipse.
The Neue Klasse models will thus provide a completely novel
user experience never before seen in series production
vehicles. So-called “regionalisable technology
stacks” will be capable of optimally customising a vehicle’s
operating system to suit the varying requirements in each of the
world’s major regions and their digital ecosystems,
providing continuous upgrades to ensure that the operating system is
always fresh. At the same time, the digital first
approach systematically integrated in the Neue Klasse will
enable an increasing proportion of revenues to be generated over the
vehicle's life cycle via individually configurable and
bookable features going forward.
The aerodynamic design of the Neue Klasse will be
uncompromisingly aimed at electric vehicles with proportions that
differ from the past, including a more spacious interior.
These innovative features are to be combined with a new
generation of electric drivetrain based on a completely newly
developed, highly integrated high-voltage battery concept with an
optimised cell design. In the Neue Klasse, this
unique combination will mean significant leaps in
terms of low electricity consumption, with the
ultimate aim of matching the range and
manufacturing cost of state-of-the-art combustion engines.
The new generation of powertrains will be based on highly
scalable modules capable of covering all market segments
and Neue Klasse variants from high-volume series through to exclusive
high-performance M models. An electric drivetrain
based on the hydrogen fuel cell is also a distinct
option going forward. The typical BMW driving
experience will be additionally enhanced by focusing on the
design features of fully electric vehicles, including options for
state-of-the-art driver assistance systems and highly
automated driving.
Paradigm shift: secondary first and circular economy are goals
for future product generations
With its Neue Klasse models, the BMW Group intends
to raise the significance of sustainability to a radically new level.
Apart from switching to renewable energy to power its own production
processes as well as those within the supply chain, the BMW Group will
also focus on greatly reducing
resource consumption in general. In light of the
growing scarcity of finite resources and rising raw
materials prices, this step is absolutely imperative in terms of
efficiency, but also a crucial lever for promoting
sustainability from the BMW Group's perspective going
forward. “In 2017, for the first time, mankind extracted more than 100
billion tonnes of raw materials within a single year – a trend that we
also need to counteract in the automotive industry,” said
Zipse. “Those wishing to use the earth’s scarce
resources to drive their business model will need good reasons to do
so in the future.”
Accordingly, the proportion of secondary materials
used to manufacture the Neue Klasse (such as recycled steel, plastic
or aluminium) will be sharply increased with a view to minimising the
extraction of primary raw materials. With this principle in mind, the
BMW Group is examining a paradigm shift based on a
secondary first approach in development – in other
words, using secondary materials wherever quality and availability
factors allow. “We are intent on ensuring that the 'greenest'
electric car on the market is made by BMW,” said Zipse.
In doing so, the BMW Group can build on more than ten years of
experience gained during the development of the BMW
i3*, the first vehicle established on the basis of a
holistic understanding of sustainability. Alongside
other innovations, around 25 percent of the materials used for the
thermoplastic exterior parts of the BMW i3* are either recycled or
produced from renewable resources. A high proportion
of renewable raw materials and recyclates are also used to make the interior.
In future, recycling will be taken into account right from the
vehicle design stage. This approach is vital, as
one of the main challenges currently faced in recycling
processes is to extract the materials in a sufficiently pure
form. For example, it is essential that a vehicle's electrical systems
can be easily removed prior to recycling – in order to avoid mixing
the steel and copper contained in the vehicle's wiring harness.
Otherwise, the secondary steel recovered will no longer meet the
strict safety requirements of the automotive
industry. The use of monomaterials, such as for the
seats, also needs to be greatly increased in order to maximise the
volume of material retained in the recycling loop. Prior to the
IAA Mobility in 2021, the BMW Group will provide a
detailed explanation of this circular economy
approach. It is also exploring the possibility of
cross-industry collaborations to make the goal of the circular
economy a reality.
2030: Fully electric models to account for at least 50 percent
of global deliveries – all model series to include a fully electric option
The third phase will see a gradual decline in the
absolute number of combustion engine vehicles delivered to customers.
By contrast, the number of fully electric vehicles the BMW Group
delivers is expected to continue growing by an average of over
20 percent annually between 2025 and 2030. Based on its
current market expectations, fully electric vehicles are
expected to account for at least 50 percent of the BMW Group’s
deliveries to customers by 2030. The actual figure is
likely to vary significantly from one market to the next and will
depend largely on the progress made in the regional expansion of
charging infrastructure.
By that stage, across the
entire product portfolio, all market segments in
which the BMW Group operates will include at least one fully electric
model. In fact, a number of segments may well be served exclusively by
fully electric models. Accordingly, the BMW Group will also be capable
of providing a significantly higher market share of fully electric
vehicles, assuming demand develops accordingly. The BMW Group expects
to have around ten million fully electric vehicles on
roads worldwide over the next ten years or so.
MINI to become an all-electric brand
MINI is set to play a pioneering role going forward,
as the urban brand is absolutely ideal for electric mobility. It will
therefore be introducing its very last new combustion engine model as
early as 2025 and launch only fully electric models
from that point onwards. By 2027, fully electric
vehicles will account for at least 50 percent of all
MINI deliveries to customers. By the early 2030s,
the entire MINI range will be fully
electric, while still remaining a global
brand with a footprint in every region of the world.
The fully electric MINI SE* is currently being
manufactured at the Oxford plant. The successor to
the MINI Countryman will be built at the
Leipzig plant from 2023. The new MINI crossover
model will be produced there in both combustion engine and fully
electric versions. Based on a new vehicle architecture developed for
all-electric mobility right from the outset, MINI BEVs will also be
produced in China in collaboration with the local
manufacturer Great Wall Motor from 2023 onwards.
Sustainability integrated throughout all divisions of the company
The BMW Group is firmly convinced that the fight against climate
change and the prudent use of resources will be the two main factors
that determine the future of our society – and thus also that of the
BMW Group. As a premium manufacturer, the BMW Group aspires to lead
the way in terms of sustainability. In 2020, it fully embraced this
strategic approach across all areas of the business
– from administration through to purchasing, development,
production and sales.
The BMW Group has set itself clear decarbonisation targets between
now and the year 2030 – for the first time across the entire
life cycle of its products – including the supply chain,
the production process and right up to the end-of-life phase. In every
aspect of the Group's activities, carbon emissions per
vehicle are to be significantly reduced by
at least one third compared to 2019.
Across its own plants and locations, the BMW Group
is already setting the benchmark in terms of resource efficiency. The
decarbonisation targets it has set itself for 2030 are the most
progressive of the entire automotive sector and even more
ambitious than those associated with achieving the 1.5 degree
Celsius target. The BMW Group aims to reduce these
emissions by 80 percent by 2030. The electricity used to
produce the BMW iX* in Dingolfing and the BMW i4 in Munich, for
example, is generated via hydroelectric plants situated
directly in Bavaria. Apart from significantly cutting its
carbon emissions in absolute terms, from this year onwards the BMW
Group intends to completely neutralise its remaining
carbon emissions (Scope 1 + 2) by using corresponding certificates.
By 2030, the Group aims to reduce the carbon
emissions generated by its vehicles in the use phase
by 40 percent per kilometre driven. The crucial lever
for achieving this feat is the Group's far-reaching product strategy
that includes the massive expansion of e-mobility. Due to the growing
proportion of electrified vehicles the Group produces, far greater
attention will also have to be paid to upstream value
creation in the future when it comes to carbon emissions –
particularly in view of the considerable amount of energy required to
produce high-voltage battery systems. Without countermeasures, the
higher percentage of electrified vehicles would cause carbon emissions
per vehicle within the BMW Group's supply chain to
increase by more than one third by 2030.
The goal, however, is not just to avoid an increase,
but rather to reduce carbon emissions per
vehicle by 20 percent compared to 2019. The BMW
Group is adopting a whole range of measures to accomplish this aim,
one of which will be to include the carbon footprint of a supplier’s
supply chain as a criterion for awarding contracts. The BMW Group is
thus assuming a pioneering role as the first automotive manufacturer
to set specific decarbonisation targets for its supply chain.
Looking at the BMW iX*, the first measures are
already having a beneficial effect: the use of renewable green
electricity to produce the battery cells, combined with the
increased use of secondary materials, reduces
carbon emissions in the BMW iX* supply chain
by 17 percent compared to the same vehicle produced
without these initiatives. “The best automobiles in the world are
sustainable and that's why premium and sustainability will become more
inseparable than ever going forward,” said Zipse.
At the same time, the BMW Group is also cutting back on its use of
critical raw materials. It has reduced the amount
of cobalt in the cathode material for the current
fifth-generation battery cells to less than ten
percent and increased the amount of secondary
nickel it uses by up to 50 percent. The e-Drive no
longer requires the use of rare earths.
Strong second half of 2020 provides good tailwind
The BMW Group’s profitable performance in the second half of the
financial year 2020 provided a good tailwind going into 2021. Despite
the global pandemic, the premium automotive manufacturer recorded an
impressive pre-tax profit for the final six months of the year
amounting to € 4,724 million, 9.8% up on the previous year's already
high figure of € 4,303 million. Following the pandemic-related
downturn in earnings in the second quarter, the BMW Group has
therefore made a swift return to a more familiar profitable course. In
the second half of the year, it delivered over 1.36 million units to
customers, significantly more than in the corresponding period one
year earlier.
With the exception of the second quarter, the Group reported improved
pre-tax earnings for the remaining three quarters of 2020 compared to
one year earlier. Profit before tax for the fourth
quarter increased to € 2,260 million (2019: € 2,055 million; +10.0%).
The pre-tax return on sales (EBT margin) improved to
7.7% (2019: 7.0%).
Pandemic impacts financial year 2020
The Group's business performance for the financial year
2020 clearly reflects the impact of the corona pandemic. Due
to worldwide lockdowns lasting several weeks, vehicle
deliveries to customers fell by a moderate 8.4% to
2,325,179 units. Defying this trend, growth was particularly strong in
the upper luxury segment, with deliveries up by 12.4% to more than
115,000 vehicles, mainly reflecting the performance of the 7 Series
and the 8 Series as well as that of the BMW X7 in its first full year
on the market. Indeed, sales in this profitable segment have soared by
over 70% since 2018.
Group revenues decreased moderately to € 98,990
million (2019: € 104,210 million; -5.0%). Profit before
financial result decreased significantly to € 4,830 million
(2019: € 7,411 million; -34.8%). Profit before tax
fell to € 5,222 million (2019: € 7,118 million; -26.6%) partly
reflecting the negative impact of unfavourable currency factors. The
Group's pre-tax margin came in at 5.3% (2019: 6.8%).
The Automotive segment's
EBIT margin for the year finished at 2.7% (2019:
4.9%). The BMW Group thus met its forecast of achieving an EBIT margin
within the upper third of the targeted range of 0 to 3%. The
fourth-quarter EBIT margin even improved
year-on-year, rising to 7.7% in the final three-month period of 2020
(Q4 2019: 6.8%). Free cash flow generated by the
Automotive segment also developed positively during the second half of
the year, turning around from a pandemic-related negative free cash
flow in the first six-month period to a positive free cash flow for
the full year of € 3,395 million (2019: € 2,567 million), with good
contributions coming from improving earnings and more efficient
inventories management. Other factors affecting free cash flow were
the lower amount of warranty provisions utilised, higher proceeds from
the sale of pre-owned vehicles and increased advance payments from
dealerships during the final quarter.
Upfront expenditure on tomorrow's mobility remains high
The ongoing transformation of the BMW Group led to a high level of
expenditure on research and development in 2020, mostly benefiting
future-oriented mobility technologies such as vehicle connectivity,
highly autonomous driving and electric mobility as well as the new
vehicle projects referred to above. Overall, research and
development expenses in accordance with IFRS decreased
slightly to €5,689 million (2019: € 5,952 million; -4.4%). As a result
of intensified cost management, the R&D ratio of 6.3% also
remained practically at the previous year's level, despite a moderate
decline in Group revenues (2019: 6.2%).
Manufacturing costs were slightly down year-on-year, in line with the
lower number of vehicles delivered over the full twelve-month period.
At the same time, however, negative currency effects and a significant
increase in risk provisioning expense had a dampening effect on earnings.
As previously announced, capital expenditure on
property, plant and equipment and other intangible assets was reduced
significantly in 2020, with additions totalling €3,922 million (2019:
€5,650 million; -30.6%). A significant portion of these investments
related to new vehicle projects prior to the start of series production.
Based on the annual financial statements of BMW AG, at the Annual
General Meeting on 12 May 2021 the Board of Management and the
Supervisory Board will propose payment of a dividend
of € 1.90 per share of common stock and € 1.92 per share of
preferred stock. These figures correspond to a payout ratio of 32.5%
(2019: 32.8%) on net profit for the year amounting to € 3,857 million
(2019: € 5,022 million), giving a total dividend of € 1,253 million
(2019: € 1,646 million).
No premium without sustainability: decarbonisation targets for
2020 surpassed
Electric mobility was a key growth driver in 2020 with 192,662
electrified BMW and MINI brand vehicles sold worldwide, one third more
than in the previous year (+31.8%). Deliveries of fully electric
vehicles increased by 13%. In Europe, the proportion of total
deliveries accounted for by electrified vehicles already stands at 15%.
Following its launch in China in autumn 2020, the BMW iX3* has also
become available on European markets within the last few weeks.
Together with the BMW i3*, the MINI Cooper SE* and the upcoming BMW i4
and BMW iX*, a total of five all-electric models will be on offer by
the end of the year. Thanks to the higher number of electrified BMW
and MINI models delivered, the BMW Group improved on the emissions
target of 104 g/km set for its European fleet in 2020 by achieving a
provisional figure of 99 g/km.
Outlook for 2021: Group profit before tax significantly up on
previous year
Despite the volatile situation brought about by the global spread of
coronavirus, the BMW Group expects business to develop positively and
the risk situation to remain stable in the financial year 2021.
The Automotive segment is forecast to record a
solid year-on-year increase in deliveries to
customers worldwide. The EBIT margin for the segment
is expected to lie within a range of between 6 and 8 percent.
A range of 12 to 15 percent is predicted for the
Financial Services segment’s return on equity. The
Motorcycles segment is expected to record a
solid increase in deliveries to customers. The
EBIT margin is forecast to lie within a range of
between 8 and 10 percent.
In view of the various factors described above, Group profit
before tax is expected to be significantly
higher than in 2020. The Group will continue to utilise the
personnel-related measures previously communicated to manage the
workforce size. The total number of employees is
expected to be slightly lower than one year earlier.
Ongoing uncertainty – particularly regarding the further course of
the corona pandemic, macroeconomic and political developments as well
as international trade and customs policies – could cause economic
conditions in many regions to differ markedly from expected trends and
developments. All these factors could have a significant impact on the
overall business performance of the BMW Group.
* * *
The BMW Group – an Overview |
2020 |
2019 |
Change in % |
Deliveries to customers | | | | |
Automotive
1 | units |
2,325,179 |
2,537,504 |
-8.4 |
thereof:
BMW1 | units | 2,028,841 | 2,184,939 | -7.1 |
MINI1 | units | 292,582 | 347,465 | -15.8 |
Rolls-Royce1 | units | 3,756 | 5,100 | -26.4 |
Motorcycles | units |
169,272 |
175,162 |
-3.4 |
| | | | |
Employees (compared
to 31.12.2019) |
120,726 |
126,016 |
-4.2 |
| |
|
|
|
Automotive segment
EBIT margin | % | 2.7 | 4.9 | -2.2 % points |
Motorcycles
segment EBIT margin | % | 4.5 | 8.2 | -3.7 % points |
EBT margin BMW Group | % |
5.3 |
6.8 |
-1.5 % points |
| |
|
|
|
Revenues | € million |
98,990 |
104,210 |
–5.0 |
thereof:
Automotive | € million | 80,853 | 91,682 | -11.8 |
Motorcycles | € million | 2,284 | 2,368 | -3.5 |
Financial
Services | € million | 30,044 | 29,598 | 1.5 |
Other
Entities | € million | 3 | 5 | -40.0 |
Eliminations | € million | -14,194 | -19,443 | 27.0 |
| |
|
|
|
Profit before financial result
(EBIT) | € million |
4,830 |
7,411 |
–34.8 |
thereof:
Automotive | € million | 2,162 | 4,499 | -51.9 |
Motorcycles | € million | 103 | 194 | -46.9 |
Financial
Services | € million | 1,721 | 2,312 | -25.6 |
Other
Entities | € million | 36 | 29 | 24.1 |
Eliminations | € million | 808 | 377 | - |
| |
|
|
|
Profit before tax (EBT) | € million |
5,222 |
7,118 |
–26.6 |
thereof:
Automotive | € million | 2,722 | 4,467 | -39.1 |
Motorcycles | € million | 100 | 187 | -46.5 |
Financial
Services | € million | 1,725 | 2,272 | -24.1 |
Other
Entities | € million | -235 | -96 | - |
Eliminations | € million | 910 | 288 | - |
| | | |
|
Income taxes | € million |
–1,365 |
-2,140 |
36.2 |
Net profit
2 | € million |
3,857 |
5,022 |
–23.2 |
Earnings per share
(common/preferred share) | € |
5.73/5.75 |
7.47/7.49 |
–23.2/–23.2 |
1In connection with a review of its sales and related
reporting practices, BMW Group reviewed prior period retail vehicle
delivery data and determined that certain vehicle deliveries were not
reported in the correct periods. BMW Group has revised the data on
vehicle deliveries for previous years retrospectively. Further
information can be found in BMW Group’s 2020 Annual Report on pages
128 and 129.
2 Figure for 2019 includes a profit of € 44 million from
discontinued operations.
The BMW Group – an Overview |
4th quarter 2020 |
4th quarter 2019 |
Change in % |
Deliveries to customers | | | | |
Automotive
1 | units | 686,277 | 665,803 | 3.2 |
thereof:
BMW1 | units | 600,981 | 576,782 | 4.3 |
MINI1 | units | 84,191 | 87,628 | -3.7 |
Rolls-Royce1 | units | 1,105 | 1,393 | -20.7 |
Motorcycles | units |
39,673 |
38,230 |
3.8 |
| |
|
|
|
Employees
(compared to 31.12.2019) |
120,726 |
126,016 |
-4.2 |
| |
|
|
|
Automotive segment
EBIT margin | % | 7.7 | 6.8 | 0.9 % points |
Motorcycles
segment EBIT margin | % | -1.2 | -6.4 | 5.2 % points |
EBT margin BMW Group | % |
7.7 |
7.0 |
0.7 % points |
| |
|
|
|
Revenues | € million |
29,482 |
29,366 |
0.4 |
thereof:
Automotive | € million | 26,024 | 26,829 | -3.0 |
Motorcycles | € million | 568 | 497 | 14.3 |
Financial
Services | € million | 7,989 | 7,617 | 4.9 |
Other
Entities | € million | 2 | 1 | - |
Eliminations | € million | -5,101 | -5,578 | -8.6 |
| |
|
|
|
Profit before financial result
(EBIT) | € million |
2,197 |
2,332 |
-5.8 |
thereof:
Automotive | € million | 2,010 | 1,825 | 10.1 |
Motorcycles | € million | -7 | -32 | 78.1 |
Financial
Services | € million | 664 | 452 | 46.9 |
Other
Entities | € million | -7 | 22 | - |
Eliminations | € million | -463 | 65 | - |
| |
|
|
|
Profit before tax (EBT) | € million |
2,260 |
2,055 |
10.0 |
thereof:
Automotive | € million | 1,955 | 1,478 | 32.3 |
Motorcycles | € million | -8 | -35 | 77.1 |
Financial
Services | € million | 686 | 475 | 44.4 |
Other
Entities | € million | 55 | 85 | -35.3 |
Eliminations | € million | -428 | 52 | - |
| |
|
|
|
Income taxes | € million |
-580 |
-647 |
10.4 |
Net profit | € million |
1,680 |
1,408 |
19.3 |
Earnings per share
(common/preferred share) | € |
2.53/2.54 |
2.09/2.10 |
21.1/21.0 |
1In connection with a review of its sales and related
reporting practices, BMW Group reviewed prior period retail vehicle
delivery data and determined that certain vehicle deliveries were not
reported in the correct periods. BMW Group has revised the data on
vehicle deliveries for previous years retrospectively. Further
information can be found in BMW Group’s 2020 Annual Report on pages
128 and 129.
*Consumption/emission data:
BMW iX: Fuel consumption combined: 00 l/100 km power
consumption (NEDC): below 21 kWh/100 km; CO2 emissions: 0 g/km. Data
on driving performance, energy consumption and range are preliminary
and based on forecasts
BMW i3 (120 Ah): Fuel consumption
combined: 0.0 l/100 km; power consumption in kWh/100 km combined:
13.1 NEDC, 16.3-15.3 WLTP; CO2 emissions combined: 0 g/km
BMW i3s (120 Ah): Fuel consumption
combined: 0.0 l/100 km; power consumption in kWh/100 km combined:
14.6-14.0 NEDC, 16.6-16.3 WLTP; CO2 emissions combined: 0 g/km
MINI Cooper SE: Fuel consumption combined:
0.0 l/100 km, power consumption combined in kWh/100 km: 16.9-14.9
NEDC, 17.6-15.2 WLTP; CO2 emissions combined: 0 g/km
BMW iX3: Fuel consumption combined: 0.0 l/100 km;
power consumption combined in kWh/100 km combined: 17.8-17.5 NEDC,
19.0-18.6 WLTP; CO2 emissions combined: 0 g/km.
BMW i4: This is a pre-production model, no
homologation figures are available yet.
GLOSSARY – explanatory comments on key performance indicators
Deliveries to customers
A new or used vehicle is recorded as a delivery once its handed
over to the end user (which also includes leaseholders under lease
contracts with BMW Financial Services). In the US and Canada, end
users also include (1) dealers when they designate a vehicle as a
service loaner or demonstrator vehicle and (2) dealers and other third
parties when they purchase a company vehicle at auction and dealers
when they purchase company vehicles directly from the BMW Group.
Deliveries may be made by BMW AG, one of its international
subsidiaries, a BMW Group retail outlet, or independent third-party
dealers. The vast majority of deliveries – and hence the reporting of
deliveries to the BMW Group – is made by independent third-party
dealers. Retail vehicle deliveries during a given reporting period do
not correlate directly to the revenues that the BMW Group recognises
in respect of that particular reporting period.
EBIT
Profit before financial result. Profit before financial result
comprises revenues less cost of sales, less selling and administrative
expenses and plus/minus net other operating income and expenses.
EBIT margin
Profit/loss before financial result as a percentage of revenues.
EBT
EBIT plus financial result.
For queries, please contact:
Corporate Communications
Max-Morten Borgmann, Corporate Communications
Email: max-morten.borgmann@bmwgroup.com,
Phone: +49 89 382-24118
Dr Britta Ullrich, Corporate Communications
Email: britta.ullrich@bmw.de, Phone: +49-89-382-18364
Eckhard Wannieck, Head of Corporate and Culture Communications
Email eckhard.wannieck@bmw.de,
Phone: +49 89 382-24544
Internet: www.press.bmwgroup.com
Email: presse@bmwgroup.com
The BMW Group
With its four brands BMW, MINI, Rolls-Royce and BMW Motorrad, the BMW
Group is the world’s leading premium manufacturer of automobiles and
motorcycles and also provides premium financial and mobility services.
The BMW Group production network comprises 31 production and assembly
facilities in 15 countries; the company has a global sales network in
more than 140 countries.
In 2020, the BMW Group sold over 2.3 million passenger vehicles and
more than 169,000 motorcycles worldwide. The profit before tax in the
financial year 2020 was € 5.222 billion on revenues amounting to
€ 98.990 billion. As of 31 December 2020, the BMW Group had a
workforce of 120,726 employees.
The success of the BMW Group has always been based on long-term
thinking and responsible action. The company set the course for the
future at an early stage and consistently makes sustainability and
efficient resource management central to its strategic direction, from
the supply chain through production to the end of the use phase of all products.
www.bmwgroup.com
Facebook: http://www.facebook.com/BMWGroup
Twitter: http://twitter.com/BMWGroup
YouTube: http://www.youtube.com/BMWGroupView
Instagram: https://www.instagram.com/bmwgroup
LinkedIn: https://www.linkedin.com/company/bmw-group/