Do you need help? Please contact our support team from 9 to 17 CET via support.pressclub@bmwgroup.com.

To the extent that historical press releases reference BMW Manufacturing Co., LLC as the manufacturer of certain X model vehicles, the referenced vehicles are manufactured in South Carolina with a combination of U.S. origin and imported parts and components.

PressClub USA · Article.

MINI USA AND ABF PERFORMANCE PARTNER TO BUILD THE WORLD'S QUICKEST AND FASTEST DRAG-RACE MINI COOPER S

Woodcliff Lake, NJ - August 15, 2008... After multiple rounds of testing and nail biting qualifying runs for PINKS ALL OUT at Raceway Park in Englishtown, NJ, July 25th - 26th, the 650-horsepower MINI Cooper S drag racer, custom built by ABF Performance, emerged a crowd favorite and newly appointed giant killer. Piloted by Vincent Tennessee Kung, MINI USA's Product Manager, the little "MINI That Could" took down car after car with multiple 10-second passes and trap speeds exceeding 135mph.

MINI

Press Contact.

Shawn Ticehurst
BMW Group

Tel: +1-201-594-3360

send an e-mail

Author.

Shawn Ticehurst
BMW Group

Woodcliff Lake, NJ - August 15, 2008... After multiple rounds of testing and
nail biting qualifying runs for PINKS ALL OUT at Raceway Park in Englishtown,
NJ, July 25th - 26th, the 650-horsepower MINI Cooper S drag racer, custom built
by ABF Performance, emerged a crowd favorite and newly appointed giant killer.
Piloted by Vincent Tennessee Kung, MINI USA's Product Manager, the little "MINI
That Could" took down car after car with multiple 10-second passes and trap
speeds exceeding 135mph.

Officially the "World's Quickest and Fastest MINI", this Cooper S Hardtop has
clocked a record-setting 10.48 elapsed time at 135.16 MPH, but not before
sending home a Big-Block-equipped Camaro with a blistering start from PINKS ALL
OUT host Rich Christensen's "Arm Drop." This incredible performance resulted
from the collaboration between ABF Performance, MINI USA and MINI Financial
Services. With its custom carbon-fiber bodywork and distinctive "Get Your
Hands on a MINI" graphics (which shows two hands trying to grab the 1,750-pound
race car) there is certainly no mistaking this MINI for any other car on the
racetrack. Getting the miracle MINI into 9-second zone is just a few suspension
tweaks away.

But the fun doesn't stop at 1,320 feet out. Thanks to the massive R&D that
went into building this car, ABF Performance will continue to build on its
extensive portfolio of performance parts for street-bound and race-only MINIs.
In addition, ABF Performance will keep on designing and building a range of
turnkey race cars available for purchase by motorsports enthusiasts. Also, ABF
Performance will support a number of Club Racing series at racetracks
throughout the U.S., calculated to demonstrate the racing capabilities of the
MINI platform, while strengthening the community of MINI enthusiasts and giving
them an opportunity to sharpen their driving skills.

Vincent Tennessee Kung, MINI Product Manager, stated, "The collaborative effort
between MINI USA and ABF Performance has resulted in record-making power and
speed. As the new generation of MINIs makes its way into the hands of racers,
we look forward to seeing what the aftermarket can accomplish both on the
dragstrip and on the road course."

Hubie Fuh, Executive Vice President of ABF PERFORMANCE, INC. added, "The new
second-generation MINI platform represents a solid and flexible platform for
the construction of extreme high-performance automobiles. We look forward to
developing the new platform through our signature racing programs and competing
at a variety of racing venues, including Drag, Drift, and Road Racing events
over the coming years. We also look forward to making the MINI brand one of
the most respected in all of motorsports. The combination of MINI's
fundamental engineering and our performance enhancements will help MINI USA and
ABF Performance achieves this goal easily."

The MINI drag racer, a 2002 MINI Cooper S, has been extensively engineered and
tuned by ABF Performance and performed flawlessly over one week of grueling
competition in tough heat and humidity. The only hiccup for the team was the
factory axles, which snapped like toothpicks under Kung's driving demands and
repeated requests of "more power." Running 38 psig of turbo boost and making
9000 rpm shifts didn't help matters much either.

The MINI Cooper S Drag racer speeds on to other appearances and races this
fall, including:
• October 18-19: Battle of the Imports (BOTI), California Speedway, Fontana, CA
• November 4 - 7: Specialty Equipment Manufacturers Association (SEMA), Las
Vegas Convention Center, Las Vegas, NV (display only)

For more information about the ABF MINI, MINI USA, and MINI Financial Services,
please visit: www.miniusa.com

ABF Performance, Inc. is the recently-announced joining of forces by the two
most respected aftermarket performance suppliers for the MINI automobile, with
its base of operations located in Los Angeles, CA. ABF Performance is the
official parts, development, technical support, and motorsports affiliate of
MINI USA, a division of BMW North America. In this capacity, the company sells
original and after-market parts and services to BMW and MINI owners and racing
enthusiasts throughout the U.S. For more information about ABF Performance,
please visit: www.abfperf.com

MINI in the US
MINI is an independent brand of the BMW Group. In the United States, MINI USA
operates as a business unit of BMW of North America, LLC which has been present
in the United States since 1975. Rolls-Royce Motor Cars NA, LLC began
distributing vehicles in 2003. The BMW Group in the United States has grown to
include marketing, sales, and financial service organizations for the BMW brand
of motor vehicles, including motorcycles, the MINI brand, and the Rolls-Royce
brand of Motor Cars; DesignworksUSA, an industrial design firm in California; a
technology office in Silicon Valley and various other operations throughout the
country. BMW Manufacturing Co., LLC in South Carolina is part of BMW Group's
global manufacturing network and is the exclusive manufacturing plant for all
Z4 models, X5 Sports Activity Vehicles and X6 Sport Activity Coupes. The BMW
Group sales organization is represented in the U.S. through networks of 338 BMW
passenger car centers, 335 BMW Sports Activity Vehicle centers, 142 BMW
motorcycle retailers, 82 MINI passenger car dealers, and 30 Rolls-Royce Motor
Car dealers. BMW (US) Holding Corp., the BMW Group's sales headquarters for
North, Central and South America, is located in Woodcliff Lake, New Jersey.

Information about BMW Group products is available to consumers via the Internet
at:

www.bmwgroupna.com
www.bmwusa.com
www.bmwmotorcycles.com
www.miniusa.com
www.rolls-roycemotorcars.com

# # #

Journalist note: Information about the BMW Group and its products is available
to journalists on-line at the BMW Group PressClub at the following address:
www.press.bmwgroup.com. Broadcast quality video footage is available via The
NewsMarket at www.thenewsmarket.com.

# # #

Article Offline Attachments.

My.PressClub Login

PressClub Information

JAPAN MOBILITY SHOW.

Click here

Here you can see the webcast of the BMW Group Keynote at the Japan Mobility Show 2025. 

Search Settings.

Press Release
Press Kit
Speech
Fact & Figures

Search with attachment language.

Spanish
  • Language of Attachment
  • Arabic
  • English
  • English - US
  • German
  • Spanish
Updates
Top-Topic

Set publication time.

no Selection
  • no Selection
  • past 24 hours
  • past Week
  • past Month
  • past Year
Submit
Reset
 
Sun
Mon
Tue
Wed
Thu
Fri
Sat
 
Login