Do you need help? Please contact our support team from 9 to 17 CET via support.pressclub@bmwgroup.com.

To the extent that historical press releases reference BMW Manufacturing Co., LLC as the manufacturer of certain X model vehicles, the referenced vehicles are manufactured in South Carolina with a combination of U.S. origin and imported parts and components.

PressClub USA · Article.

Start of production of new BMW 7 Series at Plant Dingolfing

Clear commitment to Germany as high-tech production location +++ Investment of over half a billion euros in efficient new production technologies at BMW Group’s largest German manufacturing site +++ Integration of carbon-fibre and electrification expertise into existing production infrastructure +++ Technology transfer from BMW i to core BMW brand

 

Press Contact.

Hector Arellano-Belloc
BMW Group

Tel: +1-201-307-3755

send an e-mail

Related Links.

  • Clear commitment to Germany as high-tech production location
  • Investment of over half a billion euros in efficient new production technologies at BMW Group’s largest German manufacturing site
  • Integration of carbon-fibre and electrification expertise into existing production infrastructure
  • Technology transfer from BMW i to core BMW brand

 

Munich/Dingolfing. Like its predecessor, the new BMW 7 Series will also be built in Dingolfing: Series production of the sixth generation of the BMW 7 Series will get underway on 1 July. Between 2008 and the present day, 370,000 models of the previous generation were built in Dingolfing and shipped to customers in more than 100 countries worldwide. Since the launch of the first BMW 7 Series in 1977, the Dingolfing plant has produced a total of more than 1.6 million BMW 7 Series. Its main markets today are China, the US, Germany, the Middle East, Russia, Korea, the UK and Japan. Taking into account all the diverse engine, colour and customer-specific options, countless vehicle variants (options to 1070) can be produced. Barely any two BMW 7 Series leaving the Dingolfing assembly line are the same.

At the employee event to mark the start of production in Dingolfing Harald Krüger, Chairman of the Board of Management of BMW AG, said: “This car demonstrates the full innovation capabilities of our developers and designers, as well as the extensive experience and expertise gained from producing our flagship model here in Dingolfing. We have invested more than half a billion euros in the plant in the past three years alone for this purpose. The Plant has been developed and adapted so that it is fully prepared for the future with new technologies, such as carbon fibre and electrification. This represents a clear commitment on the part of the BMW Group to both Dingolfing as a high-tech production location, and to Germany.”

Intelligent lightweight design and technology transfer from BMW i

The newest version of this luxury sedan paves the way for a wide range of innovations in areas including driving dynamics, comfort, intelligent connectivity and control, all complemented by a holistic lightweight concept: Different materials are selectively combined to assure optimum vehicle performance and light weight. For example, ultra-lightweight, high-tech carbon-fibre reinforced plastic (CFRP) is used in the passenger compartment. Carbon fibre is around 30 per cent lighter than aluminium and about 50 per cent lighter than steel. The unique body structure, referred to as the “carbon core”, is based on technology transferred from the BMW i models, which helps optimise vehicle weight, as well as material strength and rigidity. This results in significantly lower fuel consumption and emissions, combined with improved driving performance, dynamics and comfort. The new BMW 7 Series models weigh up to 130 kilograms less than the previous generation.

Pioneer in large-scale production of carbon fibre

The new BMW 7 Series is the first vehicle in the BMW Group’s core model portfolio to use industrially-manufactured carbon fibre in combination with maximum-strength steel and aluminium in the body structure rather than as a visible shell material. Carbon fibre is used for the roof bows, to reinforce the roof frame, the B and C pillars, the sills, the centre tunnel and for the rear shelf. The company benefits from the knowhow gained from development and production of its BMW i models. For the first time, the BMW Group is using two enhanced, innovative and highly-efficient processes in production of the BMW 7 Series in Dingolfing: wet pressing and hybrid pressing.

In wet pressing, carbon-fibre fabrics or netting, impregnated with resin, are pressed in a three-dimensional moulding die while wet and then hardened. The dry pre-shaping previously used in the Resin Transfer Moulding (RTM) process is no longer required. In hybrid pressing, carbon-fibre fabrics impregnated with resin, also still wet, are placed in a moulding die with sheet steel, then pressed and hardened. This bonds the steel and carbon materials to form a hybrid component. Hybrid components are light, but offer maximum rigidity and outstanding crash performance. Both processes enable highly economical large-scale production of up to several thousand carbon components per day, with compact systems engineering and short cycle times.

Josef Kerscher, head of Plant Dingolfing: “Our preparations for the start of production of the new BMW 7 Series have been intensive. We have been building the BMW brand flagship and technology platform for almost 40 years in Dingolfing. It is an honour and a privilege to continue to provide top quality for our customers around the world. The key to this success lies in our decades of expertise in building premium automobiles and our highly competent and dedicated employees. The structures and new manufacturing technologies for lightweight construction and electrification we established for the BMW 7 Series ramp-up will also benefit other models built at Dingolfing.”


If you have any queries, please contact:

Corporate Communications

Saskia Eßbauer, Business and Finance Communications
Telephone: + 49 89 382-18364, Fax: + 49 89 382-24418
saskia.essbauer@bmw.de

Nikolai Glies, head of Business and Finance Communications
Telephone: +49 89 382-24544, Fax: +49 89 382-24418
Nikolai.Glies@bmwgroup.com

Bernhard Schneider, head of Plant Communications Dingolfing,
Telephone: +49 8731 76-22020
Bernhard.SB.Schneider@bmw.de


Media website: www.press.bmwgroup.com
Email: presse@bmw.de

 

The BMW Group

With its three brands BMW, MINI and Rolls-Royce, the BMW Group is the world’s leading premium manufacturer of automobiles and motorcycles and also provides premium financial and mobility services. As a global company, the BMW Group operates 30 production and assembly facilities in 14 countries and has a global sales network in more than 140 countries.

In 2014, the BMW Group sold approximately 2.118 million cars and 123,000 motorcycles worldwide. The profit before tax for the financial year 2014 was approximately € 8.71 billion on revenues amounting to € 80.40 billion. As of 31 December 2014, the BMW Group had a workforce of 116,324 employees.

The success of the BMW Group has always been based on long-term thinking and responsible action. The company has therefore established ecological and social sustainability throughout the value chain, comprehensive product responsibility and a clear commitment to conserving resources as an integral part of its strategy. 

www.bmwgroup.com

Facebook: http://www.facebook.com/BMWGroup

Twitter: http://twitter.com/BMWGroup

YouTube: http://www.youtube.com/BMWGroupview

Google+: http://googleplus.bmwgroup.com

Article Offline Attachments.

Article Media Material.

My.PressClub Login
 

PressClub Information

ANNUAL CONFERENCE 2024.

Munich. Here you can see the on demand webcast of the BMW Group Annual Conference 2024, with the world premiere of the next BMW vision vehicle on the "Road to Neue Klasse".

Open Streaming Page

Add your filter tags.

Press Release
Press Kit
Speech
Fact & Figures
Updates
Top-Topic
Submit filter
Clear all
 
Sun
Mon
Tue
Wed
Thu
Fri
Sat
 
Login