2026 ALPINA XB7 MANUFAKTUR: Limited to 120 units for North America, marking the close of a chapter.

Richmond Hill, ON.  When the first ALPINA XB7 left final assembly at BMW Plant Spartanburg in South Carolina in 2020, it marked the very first time an ALPINA model had ever been completed outside of the ALPINA workshop in Buchloe, approximately one hour west of BMW's Munich headquarters. Today, we mark the close of XB7 production with the 2026 ALPINA XB7 MANUFAKTUR – a special model limited to 120 examples for North America, 12 of which are for the Canadian market. Embodying the MANUFAKTUR standard, the XB7 MANUFAKTUR brings together exclusive finishes, tailored details, and appointments never before offered on the XB7, alongside the hallmark ALPINA balance of maximum performance, supreme ride comfort, and signature driving dynamics.

Every ALPINA XB7 MANUFAKTUR will be assembled at BMW Plant Spartanburg in South Carolina, with production commencing in September 2026 and deliveries expected in the fourth quarter of 2026. While each vehicle comes fully-equipped, clients can select their paint finish and option a Trailer Tow Hitch and/or Compact Spare Tire.

MANUFAKTUR exterior: Frozen ALPINA Green, Frozen ALPINA Blue, and a new standard for the XB7.

The 2026 ALPINA XB7 MANUFAKTUR is offered exclusively in two paint finishes never before available on the XB7: Frozen ALPINA Green and Frozen ALPINA Blue. Both finishes are new to the XB7 while remaining clearly rooted in the ALPINA colour heritage — a deliberate choice that honors the model's lineage in its final production year. Setting off both finishes are exterior design elements finished in gloss black, including the standard 23-inch ALPINA CLASSIC forged 20-spoke wheels.

The full suite of exterior trim – grille, window surrounds, air breathers, front ALPINA logo, and rear tailpipe finishers – is presented in gloss black. A unique "XB7 MANUFAKTUR" badge at the rear identifies each example. Viewed in profile, the classic ALPINA Deco-Set appliqué runs the length of the vehicle in black, while a laser-etched "MANUFAKTUR" wordmark on each B-pillar marks the designation with characteristic restraint. The optional receiver hitch supports a towing capacity of up to 3,405 kg.

MANUFAKTUR interior: Tartufo Full Merino leather, heritage ALPINA embroidery, and a "1 of 120" plaque.

Across all 120 examples – regardless of exterior finish – the ALPINA XB7 MANUFAKTUR interior is upholstered in Tartufo Full Merino leather and trimmed in ALPINA Natural Walnut Anthracite. Each front headrest carries the heritage ALPINA script embroidered in green and blue, a detail that connects the XB7 MANUFAKTUR directly to the brand's five-decade tradition of individual expression. Black front floor mats feature silver ALPINA emblem pins; the trunk mat is embroidered with the "MANUFAKTUR" wordmark.

On the forward console lid, a silver "ALPINA XB7 MANUFAKTUR" plaque confirms each vehicle's place as "1 of 120" – a direct statement of the model's significance. The 8-speed ALPINA Switch-Tronic transmission is operable via column-mounted paddles finished in anodized black.

Standard appointments include second-row captain's chairs and a Bowers & Wilkins Diamond Surround Sound system. Each ALPINA XB7 MANUFAKTUR is also accompanied by two handmade ALPINA weekender bags – crafted in brown LAVALINA leather and trimmed with the ALPINA script in coordinating green and blue — designed in concert with the vehicle's interior palette rather than added to it.

631 hp bi-turbo V8, ALPINA-tuned chassis, and 0-100 in 4.2 seconds.

At the heart of every ALPINA XB7 MANUFAKTUR is the 4.4-litre bi-turbo V8, based on the BMW S68 engine and producing 631 hp and 590 lb-ft of torque. Paired with an 8-speed ALPINA Switch-Tronic transmission and integrated 48-volt starter-generator, the XB7 MANUFAKTUR reaches 0-100 km/h in 4.2 seconds while delivering the relaxed, effortless cruising refinement that defines the ALPINA driving experience.

The standard 2-axle air suspension features ALPINA-specific damper and kinematic tuning, allows a range of 80 mm of adjustable ride height. Below 30 km/h, ride height can be raised 40 mm for clearance; at higher speeds, it lowers automatically by 20 mm – or 40 mm in SPORT+ mode above 250 km/h – for a reduced centre of gravity and sharper dynamics. Active Roll Stabilization with electromechanical anti-roll bars and stiffer rear axle bushings minimise body roll without compromising the XB7 MANUFAKTUR's signature ride quality.

Integral Active Steering delivers direct response and rear-axle turning of up to 2.3° for both low-speed agility and high-speed stability. Three driver-selectable modes – COMFORT, SPORT, and SPORT+ — allow the XB7 MANUFAKTUR to be precisely tailored to any driving situation.

Deliveries of the 2026 ALPINA XB7 MANUFAKTUR are expected to begin in the fourth quarter of 2026.

-30- 
 

BMW Group in Canada

BMW Group Canada, based in Richmond Hill, Ontario, is a wholly owned subsidiary of BMW AG and is responsible for the distribution of BMW luxury performance automobiles, Sports Activity Vehicles, Motorcycles, and MINI.  BMW Group Financial Services Canada is a division of BMW Group Canada and offers retail financing and leasing programs and protection products on new and pre-owned BMW and MINI automobiles, as well as retail financing for new and pre-owned BMW Motorcycles. A total network of 51 BMW automobile retail centres, 26 BMW motorcycle retailers, and 31 MINI retailers represents the BMW Group across the country.

For more information, please contact:

Marc Belcourt

Director, Corporate Communications

BMW Group Canada

marc.belcourt@bmwgroup.ca                                               

Jean-Francois Taylor

Product and Technology Manager, Corporate Communications

BMW Group Canada

jean-francois.taylor@bmwgroup.ca