Do you need help? Please contact our support team from 9 to 17 CET via support.pressclub@bmwgroup.com.

PressClub Nederland · Article.

BMW Group vergroot gebruik van koolstofarm staal in Europese fabrieken aanzienlijk.

+++ Nieuwe overeenkomst met Salzgitter AG voorziet levering van koolstofarm staal vanaf 2026 +++ BMW Group breidt de inkoop van koolstofarm staal uit naar twee leveranciers, tot 40% van de staalvraag bij Europese fabrieken +++ CO2-emissiebesparingen tot 400.000 ton per jaar +++ Staalrestanten van BMW Group-fabrieken zullen worden hergebruikt in de gevestigde circulaire economie +++ Post: "Een volgende belangrijke stap in het terugdringen van de CO2-uitstoot bij de bron in het leveranciersnetwerk" +++ Bijgaand het volledige, Engelstalige persbericht.

CO2 emissions
·
low-carbon
·
Steel
·
Hydrogen
·
green power
·
closed-loop material cycle
·
secondary material
·
Startup
·
Milieu
·
Corporate Finance, Feiten, Cijfers
·
Technologie
·
Corporate
·
Fabrieken, faciliteiten
·
Fabrieken
·
Duurzaamheid
·
Productie, Recycling
 

Munich. The BMW Group continues to reduce CO2 emissions in its supplier network as part of its ambitious ongoing sustainability activities. Steel produced using natural gas or hydrogen and green power, instead of fossil resources like coal, makes a vital contribution to this. The BMW Group has now signed a corresponding agreement with Salzgitter AG for delivery of low-carbon steel. The steel will be used in standard production of cars at the BMW Group’s European plants from 2026 onwards. With this move, the BMW Group is expanding its sourcing of low-carbon steel to two suppliers. The aim is to use low-carbon steel to meet over 40% of demand at its European plants by 2030, thereby reducing CO2 emissions by up to 400,000 tonnes per year.

“This is an important step in substantially reducing CO2 emissions at source in the supplier network,” said Joachim Post, member of the Board of Management of BMW AG responsible for Purchasing and Supplier Network. “Our aim is to reduce vehicles’ lifecycle carbon footprint with a holistic approach. With steel, in particular, we are leading the way by sourcing low-carbon steel for our plants in Europe in the future.”

The BMW Group will also source steel produced using hydrogen and green power from northern Sweden for its European plants from 2025 onwards, reducing CO2 emissions by up to 95%. BMW Group press plants in Europe process more than half a million tonnes of steel per year.

 

Gradual transition to low-carbon steel production

Due to its energy-intensive manufacturing process, steel production generates high CO2 emissions. However, because of its versatility, steel is one of the most important materials for car production and will continue to account for a large proportion of the body and many components.

To lower CO2 emissions from steel production on a massive scale, Salzgitter AG is gradually switching to virtually carbon-free production. Electricity from renewable sources and its use in production of hydrogen from electrolysis are key elements of the transformation. This green hydrogen will replace the coal currently used in the conventional blast-furnace process. This is made possible by so-called direct reduction plants, which use hydrogen to directly reduce iron ore to iron in the solid state. The solid iron produced in this way is then melted down with steel scrap in an electric arc furnace powered by renewable electricity.

Salzgitter AG plans to use this method to gradually reduce CO2 emissions from steel production to just 5% of what they originally were.

 

Closed loop conserves resources and reduces CO2 emissions

The BMW Group already established a closed-loop material cycle for sheet steel waste from BMW Group Plant Leipzig with Salzgitter AG more than five years ago. After delivering steel coils to the plant, Salzgitter AG takes away steel remnants of the kind produced at press plants, for example, when doors are punched out, and uses this material to produce new steel. This steel is then supplied to the BMW Group plants. In this way, raw materials can be used multiple times in a circular economy, thereby conserving natural resources.

Sheet steel waste from the BMW Group’s other European plants is also either reused through a direct material cycle or sent back to the steel producer via steel traders and processed into new steel.

 

Use of secondary steel from circular economy reduces CO2 emissions

Up to a quarter of the steel in BMW Group vehicles already comes from recycling loops. The BMW Group plans to increase its percentage of secondary steel in stages, reaching up to 50% by 2030.

Since this requires significantly less energy, CO2 emissions from production of secondary steel are an average of 50-80% lower than from primary steel.

 

Investment in startups accelerates development of new technologies

In addition to sourcing low-carbon steel, the BMW Group has also invested in an innovative method for carbon-free steel production developed by American startup Boston Metal, through its venture capital fund, BMW i Ventures. Boston Metal uses electricity for its new technology, which, by means of an electrolysis cell, produces molten iron that is later processed into steel. If electricity from renewable energies is used for this process, then steel production is carbon-free. Over the coming years, Boston Metal plans to expand the new method for steel production on an industrial scale.

Through its investment in startups, the BMW Group aims to accelerate development of new technologies, promote competition and provide impetus that will make it easier for young companies to enter the market. Innovative technologies provide better, more sustainable and more efficient access to raw materials.

Investing in new technologies is one of many steps the BMW Group is taking to meet its ambitious targets for the steel supply chain – for example, by making low-carbon production an important award criterion for every contract.

Article Offline Attachments.

Article Media Material.

My.PressClub Inloggen
 

BMW Group Streaming

WORLD PREMIERE.

Munich. 01 JUNE. Here you can see the webcast of the world premiere of the all-electric BMW iX1 & the new BMW X1.

Open Streaming Page

CO2 emission information.

De CO2 efficiency specificaties zijn vastgesteld op basis van de huidige toepasselijke tekst van de EU Verordening 2017/1151. De getoonde waarden zijn gebaseerd op het brandstofverbruik, CO2 waarden en energieverbruik volgens de NEDC cyclus voor de classificatie. Aanvullende informatie met betrekking tot het officiële brandstofverbruik en de specifieke CO2 uitstoot van nieuwe personenvoertuigen kan verkregen worden uit het “Brandstofverbruiksboekje van de RDW”, dat digitaal verkrijgbaar is via de link.

Add your filter tags.

Persbericht
Persmap
Toespraak
Fact & Figures
Updates
Top-Topic
Submit filter
Clear all
 
Sun
Mon
Tue
Wed
Thu
Fri
Sat
 
Inloggen