Extra veiligheid en comfort met crash-actieve hoofdsteunen.

In autumn 2007 occupant safety in BMW cars is being further optimised through
the introduction of crash-activated headrests: All models in the BMW 6 and the
BMW 5 Series, as well as the BMW X5 and BMW X3, now come as standard with these
newly developed headrests significantly reducing the risk of cervical vertebra
injury in the event of a collision from the rear. Masterminded by the car's
safety electronics, these crash-activated headrests move up to 60 millimetres
or 2.36" forward and up to 40 millimetres or 1.57" upward within fractions of a
second in the event of a collision, reducing the gap between the headrests and
the occupant's head before his head can be thrown back by the forces acting on
the car. This enhances the stabilising safety function of the headrest and
minimises the risk of injury or over-stretching the occupant's cervical
vertebrae.

The cervical vertebra (CV) syndrome also referred to as the whiplash trauma is
one of the most common types of injury in traffic accidents and is caused by
sudden impacts from behind.

Highly painful in many cases, such a trauma may even result from a rear-end
collision at low speeds in city traffic. To avoid collisions of this kind, BMW
introduced two-stage brake lights back in 2003, the illuminated area of the
brake lights becoming larger whenever the driver applies the brakes
particularly hard, thus giving motorists following from behind an absolutely
clear and informative signal, telling them to brake hard too. And now the new
crash-activated headrests offer the occupant of a BMW additional protection in
such a situation, whenever a collision can no longer be avoided.

Comfortable, safe, individually adjustable.
From outside the crash-activated headrests can be clearly distinguished through
their modern, two-piece look formed by the headrest support and the impact
plate together with its padding moving variably as required to the front. At
the side, in turn, the padded section features a button for manual adjustment
of headrest depth in the interest of enhanced driving comfort, enabling the
user to vary the position of the padding within three different levels by up to
30 millimetres or 1.18". In a collision the impact plate together with the
padding will instantaneously move forward by up to 60 millimetres or 2.36",
reducing the gap between the headrest and the occupant's head. And at the same
time the impact plate and padding will move up by up to 40 millimetres or 1.57".

A second variant of the crash-activated headrest has been developed for BMW's
comfort seats, in this case featuring side supports stretching along the entire
height of the headrest padding. This new version replaces the former active
headrests on the comfort seats.

Activated by the airbag control unit.
The interior of both types of crash-activated headrests comprises complex,
spring-driven mechanical operating units activated by a pyro-actuator. As soon
as the pyro-actuator ignites, it propels a release stick moving a release plate
and setting two adjustment springs free. These springs, in turn, move the
impact plate and the headrest padding both forward and upward.The pyro-actuator
receives its ignition signal from the airbag control unit as soon as the
sensors detect a relevant impact at the rear of the car, this system developed
by BMW thus acting very quickly and efficiently in protecting the occupants
from whiplash trauma.

The new crash-activated headrests enhance not only the stabilising and safety
functions of the headrest, but also the level of comfort while motoring.
Conventional headrests set to the right position are often perceived as too
close to the occupant's head and therefore appear to limit his freedom of
movement. The new crash-activated headrests, in turn, provide not only enhanced
safety, but also an improved feeling of space, since they are not required to
rest directly on the occupant's head while driving.

Once the safety mechanism in the crash-activated headrests has been actuated,
an appropriate Check/Control message will appear in the instrument cluster,
reminding the driver to go to a BMW workshop in order to renew the
pyro-actuator in the release system.